Opens in a new tab
EST. 2007
ADMISSIONS OPEN
Apply Now
← Creative Hut Library
Cinematography · Camera

Camera Settings for Cinematography

A Guide for Filmmakers
10 min read6 questions

By Abin Alex and Anu Joseph

Creative Hut Academy Library · Updated 13 November 2026

Abstract

A guide to the camera settings a cinematographer controls on every shot. It explains aperture and depth of field, the six kinds of focus used in films, how focus is pulled on set, the 180 degree shutter rule, ISO, white balance, picture style, metering and zebras, and finally audio levels and timecode. Every setting is shown on the same short film, One Cloud.

Keywords: cinematography, camera settings, aperture, depth of field, rack focus, split diopter, tilt shift, follow focus, focus puller, 180 degree shutter rule, shutter angle, ISO, white balance, picture style, zebra, audio levels, timecode

01 · Aperture and depth

How do aperture and depth of field shape a shot?

Short answer. Aperture controls how much light reaches the sensor and how deep the sharp zone is. A wide aperture isolates a face; a narrow one keeps a whole landscape sharp.

Aperture

Definition

Aperture is the opening in the lens that lets light through, measured in f-stops such as f/1.4, f/2, f/2.8, f/4, f/5.6, f/8, f/11 and f/16. The larger the number, the smaller the opening (Brown, 2016).

How to
  • Each full stop up, for example f/2.8 to f/4, halves the light; this is stopping down.
  • Each full stop down, for example f/11 to f/8, doubles the light; this is opening up.
  • Cinema lenses are marked in T-stops, the light that actually passes through the glass, so lenses match from shot to shot.
  • In video the shutter is fixed by the frame rate, so aperture, ISO and ND filters do the exposure work.
  • For still photography detail, see equivalent exposure.
Try it
Cham tip

Choose the aperture for the look first, then fix the brightness with ND filters or ISO. Do not let exposure decide your depth of field.

Cham task
  1. Shoot the same close-up at f/2, f/5.6 and f/11.
  2. Keep brightness equal with ISO or an ND filter.
  3. Compare how much of the background you can read.
Quiz

Depth of field

Definition

Depth of field is the zone in front of and behind the point of focus that looks acceptably sharp. It is set by four things: aperture, camera to subject distance, focal length and sensor size (Brown, 2016).

How to
  • Shallow: wide aperture, camera close, longer lens such as 85mm or 100mm. Use it to isolate a face, show emotion, or point the eye to one detail.
  • Deep: narrow aperture such as f/11 or f/16, camera farther away, wide lens such as 14mm to 35mm. Use it for landscapes, crowds and group reactions.
  • Larger sensors give shallower depth at the same framing.
  • ND filters let you keep a wide aperture outdoors.
Near limitFar limitPlane of focusDepth of field: the zone that looks sharp
  1. Wider aperture, closer camera or longer lens: the shaded zone shrinks.
  2. Narrower aperture, farther camera or wider lens: the zone grows.
Figure 1. Depth of field is the zone in front of and behind the plane of focus that looks acceptably sharp. Here the actor in the middle is sharp; the figures in front and behind fall outside the zone and blur.
Try it
Cham tip

Shallow focus is not always better. If the place matters to the story, let the audience see it.

Cham task
  1. Frame a friend with a busy street behind.
  2. Make the background unreadable, then fully readable.
  3. Write which version suits a lonely character and why.
Quiz
In a short film

In One Cloud, the dock wide shot uses f/8 on a 24mm lens so the ferry, mist and Appu all read; the close-up of Appu uses f/2 on an 85mm lens so only his face is sharp.

In a feature film

Many dramas switch from deep to shallow focus as a character becomes more alone, without the audience noticing why they feel it.

End of 01 · Aperture and depthNext: 02 · Types of focus
02 · Types of focus

What kinds of focus do filmmakers use?

Short answer. Focus is a storytelling choice. There are six common kinds: deep, shallow, soft, rack, split diopter and tilt shift.

Deep, shallow and soft focus

Definition

Deep focus keeps foreground and background sharp at once; shallow focus keeps one plane sharp and lets the rest blur; soft focus makes the whole frame slightly hazy, often for dreams or memories (Mercado, 2011).

How to
  • Deep focus: wide lens, f/8 or narrower, lots of light. Lets the audience choose where to look.
  • Shallow focus: wide aperture, long lens. Tells the audience exactly where to look.
  • Soft focus: diffusion filters, special lenses, or in the past a stocking over the lens. Signals that the moment is not now or not real.
Try it
Cham tip

Decide who controls the eye: you, with shallow focus, or the audience, with deep focus.

Cham task
  1. Shoot a two person scene in deep focus.
  2. Shoot it again with only one face sharp.
  3. Note how the meaning of the scene changes.
Quiz

Rack focus

Definition

A rack focus, or focus pull, shifts the plane of focus from one subject to another during a continuous shot. The shallower the depth of field, the stronger the effect.

How to
  • Use it to reveal something hidden, connect two characters, follow a thought, or move from one shot idea to the next without a cut.
  • Mark both focus distances on the lens or follow focus before the take.
  • Time the pull to a line, a look or a sound, not at random.
Frame A: paper boat sharpFrame B: Meenu sharpfocus pull
Figure 3. A rack focus moves the plane of focus during the shot, here from the paper boat in the foreground to Meenu behind it. The shallower the depth of field, the more visible the pull.
Try it

Practise focus here, then on your own camera. The controls follow a Sony camera; the scene is made with AI for practice: kingfishers 5 to 16 m away on a 200 mm lens.

Cham tip

A rack focus is a cut inside the shot. Use it only when the audience needs to look somewhere new.

Cham task
  1. Place an object close to the lens and a person behind.
  2. Mark both distances.
  3. Pull focus on a line of dialogue and watch it back.
Quiz

Split diopter and tilt shift

Definition

A split diopter is a half lens fixed in front of the camera lens, so one half focuses close and the other far, giving two sharp planes with a blur between. A tilt shift lens tilts or shifts the glass relative to the sensor, changing the angle of the plane of focus, known as the Scheimpflug principle.

How to
  • Split diopter: show two subjects at different distances both sharp, often to stress their relationship or to unsettle.
  • Hide the blurred seam on a vertical edge such as a door frame.
  • Tilt shift: tilt for a miniature look or a narrow sharp slice; shift to keep tall buildings straight.
Try it
Cham tip

Both are strong effects. One well placed split diopter shot is remembered; ten are a gimmick.

Cham task
  1. Find two subjects, one near and one far.
  2. Plan where the diopter seam would fall.
  3. Sketch the frame and the line of blur.
Quiz
In a short film

In One Cloud, shot 5.9 holds focus on the paper boat, then racks to Meenu behind as she says goodbye.

In a feature film

Deep focus classics such as Citizen Kane keep several actors sharp at different depths so a single frame tells two stories at once.

End of 02 · Types of focusNext: 03 · Focus on set
03 · Focus on set

How is focus controlled on a film set?

Short answer. Autofocus helps on small shoots, but most film work uses manual focus with a follow focus, handled by the focus puller, the first assistant camera.

Autofocus and manual focus

Definition

Modern cameras offer continuous autofocus, AF-C, and back button focus, AF-On, but focus pulls and racks need manual focus, because the filmmaker, not the camera, decides what is sharp.

How to
  • Use AF-C with face tracking for run and gun documentary or vlog work.
  • Switch to manual for any planned pull or rack.
  • Use focus peaking and magnification to check sharpness.
  • Mark distances with tape on the floor and on the lens.
Try it
Cham tip

Autofocus hunts when two faces are in frame. If the shot matters, take focus into your own hands.

Cham task
  1. Turn on focus peaking on your camera.
  2. Pull focus by hand between two marks.
  3. Repeat until it lands in one smooth move.
Quiz

Follow focus and the focus puller

Definition

A follow focus is a geared knob fixed to the camera rails that turns the lens focus ring smoothly. The person who operates it is the focus puller, usually the first assistant camera, working beside the camera operator, who keeps the framing.

How to
  • Parts: rail clamp, arm, gear, lens gear ring, focus knob and a white marking disc.
  • The focus puller measures distances to each actor mark and writes them on the disc.
  • Wireless follow focus lets the puller work from a monitor away from the camera.
  • See the full crew in crew roles.
Try it
Cham tip

Rehearse with the actors. A focus puller learns the scene the same way an actor learns lines.

Cham task
  1. List the six parts of a follow focus.
  2. Mark three distances on a white disc.
  3. Practise a pull while a friend walks between marks.
Quiz
In a short film

On One Cloud, the dock scene is marked at the railing, at Appu and at the paper boat; the first assistant camera pulls between them on cue.

In a feature film

On a feature, the focus puller often has more marks per day than the actors have lines.

End of 03 · Focus on setNext: 04 · Shutter and motion
04 · Shutter and motion

What shutter speed should you use for video?

Short answer. Set the shutter to about double the frame rate. At 24 fps, use 1/48 or 1/50. This is the 180 degree shutter rule, and it gives natural motion blur.

The 180 degree shutter rule

Definition

The 180 degree shutter rule says the shutter speed should be about twice the frame rate. It comes from film cameras, whose rotating half circle shutter was open for half of each frame (Brown, 2016).

How to
Frame rateShutter speedUse
24 fps1/48 or 1/50Cinema
25 fps1/50PAL broadcast, India
30 fps1/60NTSC broadcast, web
50 fps1/100Smooth motion, slow motion at 25
60 fps1/120 or 1/125Sport and action
100 fps1/200Slow motion
120 fps1/240Slow motion
Table 1. Shutter speed for common frame rates under the 180 degree rule.
360° shutter1/24 second at 24 fps180° shutter1/48 second at 24 fps90° shutter1/96 second at 24 fps
  1. 360°: the most motion blur, smeary movement.
  2. 180°: natural blur, the look audiences expect.
  3. 90°: crisp, staccato movement, as in battle scenes.
Figure 2. The shutter angle is how much of each frame the shutter stays open. At 24 fps a 180° shutter gives 1/48 second, which most cameras round to 1/50. The orange part is the open time.
Try it

Practise the settings here, then on your own camera. The scene is drawn for practice: a hibiscus 1.5 m away on a 50 mm lens, with a bird flying across the sky.

Cham tip

Break the rule on purpose. A 90 degree shutter makes fights and rain feel sharp and urgent; a 360 degree shutter makes a dream smear.

Cham task
  1. Shoot someone waving at 24 fps with 1/50.
  2. Shoot again at 1/400.
  3. Compare the motion and describe the feeling of each.
Quiz

Flicker and mains frequency

Definition

Mains electricity in India runs at 50 Hz. Many lights pulse with it, and a camera can record that pulse as flicker if the shutter does not match.

How to
  • In India, the UK and most of Europe use 1/50 or 1/100.
  • In North America, where mains is 60 Hz, use 1/60 or 1/120.
  • Check LED panels and fluorescent tubes on the monitor before rolling.
  • More on frame rates in Video formats.
Try it
Cham tip

If a screen or light flickers in frame, adjust the shutter in small steps until the bands stop rolling.

Cham task
  1. Film a tube light at 1/50 and at 1/60.
  2. Look for rolling bands.
  3. Write which setting is clean in India.
Quiz
In a short film

One Cloud is shot at 24 fps with a 1/50 shutter. The patrol drone scene uses 1/100 for a sharper, colder feel.

In a feature film

War films often use a 45 or 90 degree shutter so flying dirt and water look sharp and frightening.

End of 04 · Shutter and motionNext: 05 · Exposure and colour
05 · Exposure and colour

How do you set exposure and colour for video?

Short answer. Keep ISO near the camera native value, set white balance by hand, shoot a flat picture style, and check exposure with zebras rather than the screen.

ISO

Definition

ISO sets how sensitive the sensor is to light, in numbers such as 100, 200, 400, 800 and 1600. Each doubling makes the image one stop brighter, but higher values add noise.

How to
  • Find your camera native or dual native ISO and stay near it.
  • Raise ISO for night scenes rather than opening the aperture beyond the look you want.
  • Test noise at each ISO on a dark wall before the shoot.
Try it
Cham tip

Underexposing and brightening in the edit adds more noise than raising ISO in the camera. Expose correctly on set.

Cham task
  1. Shoot a dark room at ISO 400, 1600 and 6400.
  2. Look at the shadows full screen.
  3. Write your highest clean ISO.
Quiz

White balance and picture style

Definition

White balance tells the camera what white looks like under the light you are using, measured in kelvin. Picture style sets contrast, sharpness and saturation in the camera file.

How to
  • Never leave white balance on auto in a scene; it shifts between shots and makes colour grading hard.
  • Set a custom balance from a grey card, or choose a fixed kelvin value such as 5600K for daylight or 3200K for tungsten.
  • Use a neutral or flat style, or log, so contrast and sharpness can be set in the grade.
  • Lower sharpness reduces moiré on fine patterns.
  • See colour temperature for the theory.
Try it
Cham tip

Lock white balance for a whole scene, even if a shot looks slightly warm. Consistency is easier to grade than perfection.

Cham task
  1. Shoot one shot with auto white balance while you pan from window to lamp.
  2. Shoot again with a fixed 5600K.
  3. Compare how the colour shifts.
Quiz

Metering and zebras

Definition

Metering modes measure brightness across the frame: evaluative for the whole scene, centre weighted for the middle, spot for a small area. Zebras draw diagonal stripes over parts of the image above a brightness level you set.

How to
  • Set zebras at 95 to 100 percent to warn of clipped highlights.
  • Set a second zebra at about 70 percent to check skin tones.
  • Use the histogram or waveform as well as the screen; screens lie in sunlight.
  • For metering in detail, see How metering works.
Try it
Cham tip

Decide what may clip. A sky can burn out; a face should not.

Cham task
  1. Set zebras to 100 percent.
  2. Point at a window and close down until the stripes almost vanish.
  3. Note the aperture.
Quiz
In a short film

For the One Cloud dawn scenes, white balance is fixed at 5600K so the sun stays warm and the sea stays teal, and zebras guard the sky.

In a feature film

Large productions record in log and use waveform monitors on set, so exposure is judged by numbers, not by eye.

End of 05 · Exposure and colourNext: 06 · Sound and timecode
06 · Sound and timecode

What sound and timecode settings matter on camera?

Short answer. Set audio levels by hand, keep peaks well below 0 dB, and use timecode so sound and picture can be matched quickly in the edit.

Audio levels

Definition

Audio level is the recording gain for the microphone. The camera meter shows levels from about minus 40 dB to 0 dB; anything that reaches 0 dB clips and is distorted for good.

How to
  • Set gain manually; auto gain pumps up background noise in pauses.
  • Aim for dialogue peaks around minus 12 dB.
  • Turn the wind filter on only when there is wind; it cuts low tones.
  • Monitor with headphones; choose Live for no delay, or Lip Sync when recording to an external recorder over HDMI.
Cham tip

Record ten seconds of room tone at every location. The editor will need it to fill gaps.

Cham task
  1. Record a line of dialogue with auto gain, then manual gain.
  2. Listen to the pauses.
  3. Set a level that peaks near minus 12 dB.
Quiz

Timecode

Definition

Timecode is a time stamp on every frame, written as hours, minutes, seconds and frames, for example 01:02:03:12. It lets the editor find, sync and align footage precisely.

How to
  • Set time of day timecode when several cameras and a sound recorder must match.
  • Jam sync all devices from one master clock at the start of the day.
  • Use a slate or clap as a backup sync point.
  • Record run timecode when only one camera is used.
Cham tip

Write the timecode of good takes in the camera report. It saves hours in the edit.

Cham task
  1. Find the timecode menu on your camera.
  2. Set it to time of day.
  3. Clap on camera and find the clap frame in the edit.
Quiz
In a short film

One Cloud records sound on a separate recorder; camera and recorder are jam synced each morning, and every take is slated.

In a feature film

On features, the sound team sends the timecode master to every camera, so thousands of clips line up automatically.

End of 06 · Sound and timecodeNext: Questions
07 · Questions

Questions beginners ask

What is the best shutter speed for video?

About twice your frame rate: 1/50 at 24 or 25 fps and 1/60 at 30 fps. This is the 180 degree shutter rule. In India, staying on multiples of 50 also avoids flicker from mains lights.

How do I get a blurred background in video?

Open the aperture to a low f-number, move the camera closer, use a longer lens, and put distance between the subject and the background. Use an ND filter outdoors so you can keep the wide aperture.

What is a rack focus?

A rack focus moves the plane of focus from one subject to another during a continuous shot, guiding the audience to look somewhere new without a cut.

Should I use autofocus for filmmaking?

Autofocus with face tracking is useful for documentary and solo shoots. For planned focus pulls and dramatic scenes, manual focus with a follow focus gives control over timing.

Which picture style is best for video?

A neutral, flat or log profile, with sharpness and contrast lowered, keeps detail for the colour grade. Use a standard style only when there is no grading.

What audio level should I record at?

Set gain manually and aim for dialogue peaks around minus 12 dB, never touching 0 dB, where the sound clips.

08 · References

References

  • Ascher, S. and Pincus, E. (2012) The filmmaker’s handbook: A comprehensive guide for the digital age. 4th edn. New York: Plume.
  • Brown, B. (2016) Cinematography: Theory and practice. 3rd edn. New York: Routledge.
  • Malkiewicz, K. and Mullen, M. D. (2005) Cinematography. 3rd edn. New York: Simon and Schuster.
  • Mercado, G. (2011) The filmmaker’s eye: Learning (and breaking) the rules of cinematic composition. Burlington: Focal Press.

Further reading

© 2026 Creative Hut Academy. Written by Abin Alex and Anu Joseph. Drafted with AI assistance. Last updated 13 November 2026. To copy, republish, translate or adapt any part of it, you need written permission. Ask through the contact page. Found a mistake? Write to director@creativehut.org.
More guides in the Library →
Learn this hands on

Make this your craft at Creative Hut Academy

Creative Hut Academy in Mattakkara, Kottayam, Keralam teaches photography, cinematography, editing, sound and AI filmmaking in one-year residential diplomas. Students come from across India.

Want to talk? Message us on WhatsApp, or ask Cham, our AI mentor, a study doubt.