Abstract
A guide to writing a screenplay in the standard format used in film and television. It explains why a film needs a written script, then takes each element of the page in turn: scene heading, subheading, action lines, capitals, character, dialogue, parentheticals, extensions, transitions and scene numbers. It gives the page margins and font, and ends with the script breakdown and stripboard that turn the screenplay into a shooting plan.
Keywords: screenplay format, how to write a screenplay, scene heading, slug line, action lines, dialogue, parenthetical, voice over, transitions, script breakdown, stripboard
What is a screenplay, and why does a film need one?
Short answer. A screenplay is the story written for the screen: where and when each scene happens, who is in it, what they do and what they say. It is the blueprint every department builds the film from.
Script and screenplay
A script is the written version of any visual work; a screenplay is a script written for a film or television. It sets out each scene’s place and time, the characters, their actions, reactions and dialogue, in a fixed format (Trottier, 2014).
- A feature screenplay is usually 90 to 120 pages; most run around 110.
- One page is about one minute of screen time, so a two hour film is about 120 pages (Field, 2005).
- Act I is about the first 30 pages, Act II to page 90, Act III to the end.
- Write what we will see and hear, not what we cannot film, such as thoughts or memories, unless you show them.
- Once the script is locked, divide each scene into shots: see Shot Division.
Think of the screenplay as a building blueprint. The engineer, mason, carpenter, plumber and electrician all read the same drawing; the director, actors, cinematographer and editor all read the same script.
- Download a published screenplay of a film you know.
- Time the first ten pages against the film.
- Check how close one page is to one minute.
What a script is used for
A film needs many people: actors, director, cinematographer, art director, costume and make-up, editor, sound recordist and music director. The script lets all of them plan in advance instead of the director explaining the film again and again.
- Cast: bring only the actors needed for each day’s scenes.
- Locations: find places that suit the story.
- Art: prepare sets and props for each scene in advance.
- Decisions: plan music, sound effects, visual effects, costume and make-up before shooting.
- Light: day or night, inside or outside, tells the cinematographer what lights to bring.
A missing detail in the script becomes a lost hour on set. If a prop matters, the script must name it.
- Take one scene from a screenplay.
- List every department that needs to read it.
- Write one thing each department learns from it.
For a 5 minute film the script is about 5 pages, but the same format lets a small crew plan a one day shoot.
A 110 page script feeds a crew of a hundred; the art department alone reads it for every prop.
How does a story become a screenplay?
Short answer. We take one moment of the short film One Cloud and turn its prose into screenplay lines, then read the whole 3 page screenplay, and see how page one changes when the structure changes.
From prose to screenplay lines
A story is told in sentences; a screenplay is told in what the camera sees and the microphone hears. Turning one into the other means cutting every word that cannot be filmed, splitting the rest into scene headings, action, character, dialogue and transitions.
- Turn every change of place or time into a new scene heading.
- Keep only what can be seen or heard; cut opinions and explanations.
- Put key props and sounds in capitals for the crew.
- Turn narration into dialogue, or into an action we can see.
- Read the full One Cloud story in the Story guide.
| In the story (prose) | In the screenplay | What changed |
|---|---|---|
| At sunrise, on the rooftop, Kunju lifts off. | EXT. ROOFTOP GARDEN, TOWER 9 - DAWN | Time and place become a scene heading |
| A small grey cloud gathers above it. Three drops fall on Meenu’s hand, and she laughs out loud. | A small grey CLOUD gathers. Three drops hit Meenu’s palm. She laughs. | Shorter, present tense, only what we see and hear; the key prop in capitals |
| Then a white patrol drone drops out of the sky, scans Kunju and freezes it in mid-air. | A white PATROL DRONE drops into frame. A red scan line. Kunju freezes mid-air. A low HUM. | Sounds in capitals for the sound team |
| Officer Rani takes Kunju for unscheduled weather, and leaves a warning. | RANI (O.S.) / Unscheduled weather. / Step away from the device. | Narration becomes a voice the audience hears; O.S. because she is not yet in frame |
When a story line says what a character feels, ask what she does. "Meenu is afraid" becomes "Meenu pulls the blanket over her head".
- Take one paragraph of your story.
- Underline every word the camera cannot film.
- Rewrite the paragraph as a scene heading and action lines.
The One Cloud screenplay
Here is the full shooting script of One Cloud: six scenes, about three pages, which runs about three minutes on screen. Read it alongside the story and notice what was kept, what was cut and what became a picture.
1 EXT. ROOFTOP GARDEN, TOWER 9 - DAY 1
Dry soil in tubs. Below, the floating city glints on a
flat grey sea. MEENU (12), oil on her fingers, mends a
delivery drone. APPU (78) folds a PAPER BOAT from an old
calendar page.
APPU
When I was your age, rain came in
the afternoon. We raced these down
the lanes.
MEENU
(not looking up)
Rain is at night, Appu. Twenty
minutes.
A soft CHIME. Appu glances at the band on his wrist:
MAINLAND CARE HOME. FERRY 05:40.
He slides the paper boat into his shirt pocket. Says
nothing. Meenu has seen it.
CUT TO:
2 INT. MEENU’S CORNER, UNDER THE WATER TANK - NIGHT 2
A scrap pile. Meenu drags out a dented WEATHER DRONE. Half
its sprayer is missing.
MEENU
Kunju.
She works: a dead fan, a water filter, solder smoke.
She hums as she works.
3 EXT. ROOFTOP GARDEN, TOWER 9 - DAWN 3
Kunju lifts off, wobbling. A small grey CLOUD gathers.
Three drops hit Meenu’s palm. She laughs.
A white PATROL DRONE drops into frame. A red scan line.
Kunju FREEZES mid-air.
RANI (O.S.)
Unscheduled weather. Step away
from the device.
4 INT. MEENU’S ROOM - DAWN 4
Meenu under her blanket. Through the wall, Appu HUMS the
boat song. A long beat. She throws the blanket off.
5 EXT. FERRY DOCK - DAWN 5
Appu waits with one bag. Meenu runs in with a SPRAYER, a
FAN and a HOSE taped together. She climbs the railing,
switches it on. A clumsy MIST rises and catches the sun.
On the patrol boat, OFFICER RANI (40) lowers her scanner.
Looks away.
Appu sets the paper boat on the wet deck. It floats.
MEENU
Bye, Appu.
DISSOLVE TO:
6 EXT. ROOFTOP GARDEN, TOWER 9 - NIGHT 6
The scheduled RAIN. Meenu stands in it, awake. A new paper
boat sails across a puddle at her feet.Count how many story words became how many screenplay words. A good adaptation is usually shorter, because pictures replace sentences.
- Read the story and the screenplay of One Cloud side by side.
- List three things the story says that the screenplay shows instead.
- Write the screenplay of your own story’s first scene.
How the structure changes the screenplay
When the structure or order changes, the screenplay changes most at the top. The same film can open on the dry rooftop (linear) or on the mist at the dock with a time card (climax first); the scenes after are rearranged to match.
- Linear: scene 1 is the dry rooftop.
- Climax first: scene 1 is a short piece of the dock, then a time card, then the rooftop.
- Ending first: scene 1 is the night rain with Meenu alone; the dock is saved for the end.
- Only the order and a few linking lines change; most scene text stays the same.
1 EXT. ROOFTOP GARDEN, TOWER 9 - DAY 1
Dry soil in tubs. MEENU (12) mends a drone. APPU (78)
folds a PAPER BOAT.1 EXT. FERRY DOCK - DAWN 1
A clumsy MIST rises over a girl on a railing, MEENU (12),
and an old man with one bag, APPU (78).
CUT TO:
TITLE: TWELVE HOURS EARLIER
2 EXT. ROOFTOP GARDEN, TOWER 9 - DAY 2If you open climax first, show only part of the peak. Hold back the answer, here whether Appu stays or goes, until the scene returns.
- Write page one of your script in linear order.
- Write it again as climax first.
- Decide which page one makes you want to read on.
One Cloud’s three pages match its three minutes. A 1 minute advert would cut it to scenes 1, 3 and 5.
A feature writer adapts a 4,000 word treatment into about 110 pages, scene by scene, the same way.
How do you write a scene heading and a subheading?
Short answer. A scene heading, or slug line, opens every scene in capitals: INT. or EXT., the location, and the time of day. A subheading marks a smaller change inside the same scene.
Scene heading (slug line)
The scene heading is the first line of every scene. Written in capitals from the left margin, it says whether the scene is inside (INT.) or outside (EXT.), where it takes place and when: DAY, NIGHT, MORNING, EVENING or CONTINUOUS.
- Format: INT. or EXT. + LOCATION + DAY or NIGHT. Example: EXT. BUS STAND, MATTAKKARA - DAY.
- Use INT./EXT. when a scene moves between inside and outside, such as a car.
- Keep location names the same every time; the breakdown depends on it.
- Day or night matters: a sunlit exterior may need only reflectors, while a day interior needs light that feels like natural daylight.
Name the location the same way every time. "Anu’s house", "Anu house" and "the house" look like three locations to the person scheduling the shoot.
- Write scene headings for five scenes of your story.
- Mark each INT. or EXT. and DAY or NIGHT.
- Check the location names match exactly.
Subheadings
A subheading is a short line in capitals, like a mini scene heading, that marks a smaller change within the master scene: another room, a specific area, a point of view or a moment in an action sequence.
- Use for moving from room to room inside the same house: KITCHEN, then BEDROOM.
- Use to break a long scene into readable parts.
- Use for a specific visual direction such as ANU’S POV.
- Use inside action sequences to keep the reader oriented.
- Write it left-aligned and in capitals, without INT. or EXT.
If the time or the main location changes, write a new scene heading, not a subheading.
- Take a scene that moves through a house.
- Write one master scene heading.
- Add subheadings for each room.
A 2 minute film shot in one flat might have one master heading, INT. HOSTEL ROOM - NIGHT, and subheadings for the window and the door.
An action sequence across a market uses one master heading and a run of subheadings: FISH STALLS, BACK LANE, ROOFTOP.
How do you write action lines?
Short answer. Action lines describe, in the present tense, only what the audience will see and hear: actions, places and the look of characters. Capitals mark a character’s first appearance, key sounds and key props.
Writing action lines
Action lines sit below the scene heading and tell the reader what they will see and hear in the finished film. They are written in the present tense, visually, from margin to margin.
- Present tense: "She runs", not "She ran".
- Write only what the camera can see or the microphone can hear.
- Keep paragraphs short, three or four lines; each new paragraph suggests a new image.
- Describe a character briefly on first appearance: age and one telling detail.
- Do not write shot sizes or camera angles; that is the director’s job.
If you cannot film a sentence, rewrite it. "She remembers her father" is a thought; "She touches her father’s old watch" is a picture.
- Write the action for one scene in under eight lines.
- Underline any sentence that cannot be filmed.
- Rewrite each underlined sentence as something we can see or hear.
Capital letters
Capitals in a screenplay draw the crew’s attention to things they must prepare. Scene headings and subheadings are always in capitals, as are a character’s name the first time they appear, transitions, key sound effects, important props and camera moves.
- Always capitals: scene headings, subheadings, transitions.
- First appearance: KICHU (20), then Kichu in later action lines.
- Sound effects: a GUNSHOT, the BUS HORN.
- Key props: a RED BUS, the OLD WATCH.
- Use capitals sparingly; if everything is capitalised, nothing stands out.
Capitals are for the people breaking down the script. A sound recordist scanning for capitals should find every sound they must record or create.
- Read a page of your script.
- Capitalise first appearances, key sounds and key props.
- Count the capitals; if more than ten, cut some.
"A KITE snaps free and rides the wind over the paddy field." One capital tells the art department to make a kite.
In a war film the sound department lists every capitalised EXPLOSION and GUNSHOT from the script before the shoot.
How do you format character names, dialogue and parentheticals?
Short answer. The speaking character’s name sits in capitals towards the centre, the dialogue below it, and a short parenthetical between them when the actor needs a direction.
Character name
Above each line of dialogue, the speaker’s name is written in capitals, set in from the left. It can be a first name, a surname or a nickname, but it must stay the same throughout the script.
- Capitals, about 3.7 inches from the left edge of the page.
- Pick one name per character and never change it.
- Characters are the life of the story: the audience travels with them, so their speech must sound like them.
Give characters names that start with different letters. KICHU and KANNAN look alike at a glance; KICHU and ANU do not.
- List every speaking character in your script.
- Check each has one fixed name.
- Rename any two that start with the same letter.
Dialogue
Dialogue is what the characters say. It should sound like the character: shaped by their education, culture, surroundings and what they want in that moment. It sits below the character name in a narrower column.
- Write as the character would speak, not as you would.
- Let desire drive the speech: every line wants something.
- Gather research and learn from real speech around you.
- Say the dialogue out loud to hear if it works.
- Do not write shots inside the dialogue; the director decides close-ups and wide shots.
If two characters can swap lines and nobody notices, both voices are too thin. Give each a word or rhythm only they use.
- Record a real conversation you are allowed to record, for two minutes.
- Transcribe it and notice how people really speak.
- Rewrite one scene of your script with that rhythm.
Parentheticals
A parenthetical is a short direction in brackets, placed under the character’s name and above the dialogue, that tells the actor how to say a line or what small action to do while saying it.
- Keep it to a few words: (whispering), (laughing), (tearfully), (painfully).
- Use it for a small action during the line: (reading), (stretching), (drawing his weapon).
- Use it only when the meaning would otherwise be unclear.
- Do not use it for big actions; those go in the action lines.
Actors dislike being told how to act. Use a parenthetical only when the line could be read the wrong way.
- Read your dialogue without any parentheticals.
- Mark lines that could be read the wrong way.
- Add a parenthetical only to those.
In a 3 minute film with one long silence, a single parenthetical such as (finally) can carry the whole turn.
Courtroom dramas lean on parentheticals like (to the jury) to show who a line is aimed at.
What do V.O., O.S. and the transitions mean?
Short answer. Extensions beside a character’s name say where a voice comes from: voice-over, off screen, off camera, a device or a pre-lap. Transitions at the right margin tell the editor how one scene moves to the next.
Extensions: V.O., O.S., O.C. and pre-lap
An extension is a short technical note in brackets after the character’s name that explains where the voice comes from when the speaker is not seen normally on screen.
- V.O. (voice-over): heard but not in the scene, such as a narrator, a voice on the phone or radio, or a character’s inner thoughts.
- O.S. (off screen): the character is in the scene’s space but not in the frame, for example in the next room.
- O.C. (off camera): the same idea, used mostly in television scripts.
- Into devices: a character speaking into a phone or radio.
- Pre-lap: a line from the next scene heard before we cut to it: NAME (PRE-LAP).
Ask one question: is the speaker physically in the scene? Yes but unseen is O.S.; not in the scene at all is V.O.
- Find one voice-over and one off-screen line in a film.
- Write each in screenplay format.
- Add one pre-lap to your own script.
Transitions
A transition tells the editor how to move from one scene to the next. It is written in capitals against the right margin, between the two scenes.
- CUT TO: a straight cut; often left out because it is assumed.
- SMASH CUT TO: a sudden, jarring cut for shock or comedy.
- MATCH CUT TO: a cut linking two similar shapes, movements or actions.
- DISSOLVE TO: one image fades into the next, often to show time passing.
- INTERCUT: cutting back and forth between two places, such as both ends of a phone call.
Write a transition only when it carries meaning. A page full of CUT TO: wastes lines the story needs.
- Find a match cut in a film you know.
- Write the two scenes around it with MATCH CUT TO:.
- Remove any plain CUT TO: from your own script.
Scene numbers
Scene numbers are written at both edges of each scene heading in the shooting script. Scenes are shot out of order, so the numbers let the crew schedule them and the editor put them back in story order.
- Leave scene numbers out of the draft you send to producers; add them when the script is locked for shooting.
- Number on both sides of the scene heading.
- If a scene is added after numbering, use 12A, 12B, so the other numbers do not change.
Never renumber a locked shooting script. Every schedule, call sheet and camera report depends on those numbers.
- Number every scene in your script.
- Add a new scene between 4 and 5 and call it 4A.
- Check the schedule still matches.
A 4 minute phone-call film can be written as one INTERCUT between two rooms instead of twenty short scenes.
No Country for Old Men opens with a voice-over over empty landscapes before we meet the speaker.
What are the margins and font of a screenplay page?
Short answer. Courier 12 point, a 1.5 inch left margin, 1 inch on the other sides, about 55 lines a page, dialogue starting 2.5 inches from the left and character names at 3.7 inches.
Margins, font and page numbers
The standard screenplay page uses a fixed font and fixed margins so that every page holds about the same amount of screen time, roughly one minute (Riley, 2009).
- Font: Courier, 12 point.
- Margins: 1.5 inches left (for binding), 1 inch right, 1 inch top and bottom.
- Lines: about 55 per page.
- Dialogue block: starts 2.5 inches from the left edge of the page.
- Character name: starts 3.7 inches from the left edge, in capitals.
- Page numbers: top right, 0.5 inch from the top. The title page is not numbered and is not page one.
12 EXT. BUS STAND, MATTAKKARA - DAY 12
Rain on a tin roof. ANU (19), a camera bag held under
her shawl, watches the road.
A RED BUS splashes past without stopping.
ANU
(under her breath)
That was the last one.
KICHU (O.S.)
Not if you run.
She turns. KICHU (20) stands at the tea shop, grinning.
CUT TO:Use screenwriting software such as Celtx, WriterDuet or Final Draft. It sets every margin for you, and you can write instead of measuring.
- Set up a page with the margins above, or open a screenwriting app.
- Type the sample page from Figure 1.
- Check your page count against your planned running time.
Even a 3 page short should use the standard format; festivals and funders read it the same way.
A 95 page thriller and a 130 page epic are judged partly by length before anyone reads a line.
What is a script breakdown and a stripboard?
Short answer. The script breakdown lists every element each scene needs and measures each scene in eighths of a page. The stripboard arranges those scenes into the order they will be shot.
Breaking down the script
A script breakdown is the first assistant director’s list of everything each scene needs, cast, props, costumes, vehicles and effects, with each scene’s length measured in eighths of a page (Honthaner, 2010).
- Divide each page into eight parts; a scene of 3 eighths is 3/8 of a page.
- Plan for about five pages shot per day on an average production.
- A song may be one line in the script but two or three minutes on screen; give it its own time.
- Mark these elements in each scene, each in its own colour: cast and characters, extras, props, set dressing, costumes, make-up (blood, wounds), vehicles, stunts, special effects (rain, wind, explosions), animals, sound, music, special equipment.
A one line action like "the crowd riots" can take a whole day to shoot. Measure by work, not by page count, for big moments.
- Take one scene from your script.
- Measure its length in eighths of a page.
- List every element it needs under the headings above.
The stripboard
A stripboard is a production chart that arranges scenes into shooting order using coloured strips, one per scene, with day breaks between shooting days. It used to be a wooden board; today it is usually a spreadsheet or scheduling app.
- Each strip shows: scene number, INT. or EXT., script location, a short description, DAY or NIGHT, cast ID numbers, shooting location and page count in eighths.
- Group scenes by location, then by day or night, then by cast.
- Colour the strips by type.
| Scene type | Strip colour |
|---|---|
| Day interior | White |
| Day exterior | Yellow |
| Night interior | Blue |
| Night exterior | Green |
| End of shooting day | Black |
Shoot all scenes at one location together, even if they are far apart in the story. Moving a crew costs more than any other single thing on a shoot.
- Make a spreadsheet with the strip fields as columns.
- Enter every scene of your script.
- Sort by location, then by day or night, and see how many shooting days you need.
A 10 page short with three locations may shoot in two days: day 1 house, day 2 road and bus stand.
A feature’s stripboard can run to forty shooting days, each ending in a black strip.
Questions beginners ask
Courier 12 point on pages with a 1.5 inch left margin and 1 inch on the other sides, with scene headings, action lines, character names, dialogue, parentheticals and transitions laid out in fixed positions.
INT. means the scene takes place inside (interior); EXT. means outside (exterior).
V.O. (voice-over) is a voice not physically in the scene, such as a narrator. O.S. (off screen) is a character in the scene’s space but outside the frame.
Most feature screenplays are 90 to 120 pages; one page is about one minute of screen time.
No. Describe what we see and hear; shot sizes and angles are the director’s choice.
A short direction in brackets under the character name, telling the actor how to say a line or what small action to do.
A list of everything each scene needs, such as cast, props, costumes and effects, with scene length measured in eighths of a page, used to schedule the shoot.
References
- Field, S. (2005) Screenplay: The foundations of screenwriting. Rev. edn. New York: Delta.
- Honthaner, E. L. (2010) The complete film production handbook. 4th edn. Burlington: Focal Press.
- Riley, C. (2009) The Hollywood standard: The complete and authoritative guide to script format and style. 2nd edn. Studio City: Michael Wiese Productions.
- Trottier, D. (2014) The screenwriter’s bible. 6th edn. Los Angeles: Silman-James Press.
Make this your craft at Creative Hut Academy
Creative Hut Academy in Mattakkara, Kottayam, Keralam teaches photography, cinematography, editing, sound and AI filmmaking in one-year residential diplomas. Students come from across India.
Want to talk? Message us on WhatsApp, or ask Cham, our AI mentor, a study doubt.