Opens in a new tab
EST. 2007
ADMISSIONS OPEN
Apply Now
← Creative Hut Library
Design · Print

Page Setup for Print

A Guide for Designers
10 min read5 questions

By Abin Alex and Anu Joseph

Creative Hut Academy Library · Updated 13 November 2026

Abstract

A guide to preparing pages that print exactly as designed. It explains the anatomy of a print page (trim, bleed, slug, margins and live area), how to use rulers, guides and column guides, what printer’s marks mean, the difference between RGB and CMYK, how to handle black and resolution, and how to export a print ready PDF, for books, magazines, portfolios and wedding albums.

Keywords: page setup, bleed, slug, trim, margins, live area, safe area, guides, ruler guides, column guides, crop marks, registration marks, colour bar, RGB, CMYK, colour profile, rich black, 300 ppi, PDF/X, preflight, print ready

01 · Page anatomy

What are trim, bleed, slug and margins?

Short answer. A print page has layers of edges: the trim where it is cut, the bleed beyond it, the slug for notes, and the margins and live area inside it.

Trim, bleed and slug

Definition

The trim is the finished size of the page, where the paper is cut. Bleed is extra image or colour that runs past the trim, usually 3 mm, so cutting never leaves a white edge. The slug is an area outside the bleed for job notes; it is cut away.

How to
Slug area: job name, date, notesLive (safe) areakeep text and faces insideTrimBleedRegistration markColour barCrop marks
  1. Bleed: image and colour that run off the edge extend 3 mm past the trim, so no white line appears after cutting.
  2. Trim: where the paper is cut.
  3. Live or safe area: about 5 mm inside the trim; keep all text, logos and faces here.
  4. Slug: space beyond the bleed for job details; it is cut away.
  5. Crop marks, registration mark and colour bar: printer’s marks that guide cutting and check colour.
Figure 1. Anatomy of a print page. The trim (black line) is the finished size. Bleed (orange) extends past it; the live area (green) sits inside it; the slug is outside everything, for notes.
  • Any photo or colour that touches the edge must extend into the bleed.
  • Set bleed and slug in File, Document Setup.
  • Album labs may ask for 3 to 5 mm; always use the lab’s figure.
Cham tip

Cutting machines move by a millimetre or two. Bleed is your insurance; the live area is your second insurance.

Cham task
  1. Set 3 mm bleed on an A4 page.
  2. Place a photo that runs off one edge into the bleed.
  3. Turn on preview mode (W) and see the trimmed result.
Quiz

Margins and live area

Definition

Margins are the space between the trim and the main content. The live, or safe, area is the zone well inside the trim where text, logos and faces stay safe from cutting and binding.

How to
  • Keep important content at least 5 mm inside the trim.
  • In books, the inside margin is wider because pages curve into the binding.
  • In lay flat wedding albums, keep faces and text clear of the centre fold.
  • Generous margins look calm and expensive; narrow ones feel crowded.
Cham tip

Print a test spread at full size and fold it. You will see at once whether the inside margin is wide enough.

Cham task
  1. Set margins of 15 mm outside and 20 mm inside.
  2. Place text right up to the margin.
  3. Print and fold to check.
Quiz
In a magazine

A full bleed fashion photograph extends 3 mm past every edge, while the caption stays 10 mm inside the trim.

In a wedding album

A panoramic spread keeps the bride’s face a hand’s width away from the centre fold of the album.

End of 01 · Page anatomyNext: 02 · Guides and rulers
02 · Guides and rulers

How do guides help you lay out a page?

Short answer. Guides are non printing lines that help you place things precisely: margin and column guides come from the document, ruler guides you add yourself.

Rulers and ruler guides

Definition

Rulers (Ctrl + R) run along the top and left of the window. Drag from a ruler to create a ruler guide; drag from the corner to set the zero point. Layout, Create Guides makes evenly spaced rows and columns in one step.

How to
  • Hold Ctrl while dragging to make a guide across the whole spread.
  • Lock guides with View, Grids and Guides, Lock Guides.
  • Put guides on their own layer so they can be hidden together.
  • Smart guides appear briefly to show alignment and equal spacing as you move objects.
Cham tip

Put guides on parent pages, not on single pages, so every page shares them.

Cham task
  1. Show rulers and drag two guides.
  2. Use Layout, Create Guides to make 4 rows and 3 columns.
  3. Lock the guides.
Quiz

Margin and column guides

Definition

Margin guides (pink by default) and column guides (violet) come from Layout, Margins and Columns. They are the base grid of every page.

How to
  • Set them on the parent page so all pages follow.
  • Choose the number of columns and the gutter (the space between them).
  • Text frames snap to column guides when you draw them.
  • Grids in depth: Grid Systems in Design.
Cham tip

Choose a column count that divides many ways. Six or twelve columns give halves, thirds and quarters.

Cham task
  1. Set 3 columns with a 5 mm gutter on a parent page.
  2. Draw text frames that snap to the columns.
  3. Change to 6 columns and see the new options.
Quiz
In a book

A novel uses only margin guides and one column; a textbook adds a narrow outer column for notes and figures.

In a portfolio

A portfolio uses a 6 column grid so projects can run full width, half width or in thirds.

End of 02 · Guides and rulersNext: 03 · Printer’s marks
03 · Printer’s marks

What are crop marks, registration marks and colour bars?

Short answer. Printer’s marks sit outside the trim and guide the press and the cutting machine. You add them when exporting the PDF.

Crop, registration and colour marks

Definition

Printer’s marks are small lines and targets outside the page that tell the printer where to cut and whether the inks line up and print at the right strength.

How to
MarkWhat it does
Crop marksShow the printer where to cut the trim
Bleed marksShow the edge of the bleed
Registration marksTargets printed in every ink; if they line up, the plates are aligned
Colour barsPatches of each ink, measured to check colour and density
Page informationFile name, date and page, printed in the slug
Table 1. Printer’s marks.
  • Turn them on in Export, Adobe PDF, Marks and Bleeds.
  • Add an offset of about 3 mm so marks sit outside the bleed.
  • Use the swatch called Registration only for marks; it prints in every ink.
Cham tip

Ask whether your printer wants marks. Some digital printers prefer a PDF with bleed and no marks.

Cham task
  1. Export a PDF with crop marks and bleed marks.
  2. Open it and find each mark.
  3. Export again without marks and compare.
Quiz

Folds and spines

Definition

Fold marks show where a sheet will be folded, as in brochures. Books and albums have a spine whose width depends on the number of pages and the paper.

How to
  • Get the exact spine width from the printer before designing a cover.
  • A book cover is one wide document: back, spine and front, plus bleed.
  • Lay flat albums have no visible spine gap, but the centre still bends; keep faces out.
Cham tip

Never guess a spine width. Paper thickness changes it more than page count does.

Cham task
  1. Ask a printer for a spine width for 120 pages.
  2. Build a cover document with back, spine and front.
  3. Add guides at both spine edges.
Quiz
In a book

A 160 page paperback on 80 gsm paper has a spine about 9 to 10 mm wide; the printer confirms the exact figure.

In a wedding album

Album labs send their own templates with the fold line marked, so the design matches their binding.

End of 03 · Printer’s marksNext: 04 · RGB and CMYK
04 · RGB and CMYK

What is the difference between RGB and CMYK?

Short answer. RGB is light, used by screens; CMYK is ink, used by printing presses. Design in the mode of the final output, and convert carefully when moving from screen to print.

Additive and subtractive colour

Definition

RGB, red, green and blue, is additive: light is added on a black screen and full intensity makes white. CMYK, cyan, magenta, yellow and key black, is subtractive: inks absorb light from white paper, and more ink makes darker colour. RGB can show brighter, more saturated colours than CMYK inks can print.

How to
RGB: light adds up to whiteCMYK: inks add up to dark
Figure 2. RGB is additive: red, green and blue light add up to white on a screen. CMYK is subtractive: cyan, magenta and yellow inks absorb light and add up towards black on paper; K (black ink) makes true black.
  • The range of colours a system can show is its gamut. Bright RGB greens, blues and oranges often fall outside the CMYK gamut and print duller.
  • View, Proof Colours with a CMYK profile previews how colours will print.
  • More on colour in Colour Spaces.
Cham tip

If a client loves a neon colour on screen, show them a CMYK proof before they approve the print.

Cham task
  1. Make a bright RGB blue swatch.
  2. Turn on Proof Colours with a CMYK profile.
  3. Compare and note the difference.
Quiz

Which mode for which job

Definition

Choose the colour mode by where the work ends up: screens use RGB, offset presses use CMYK, and many photo labs print from RGB files.

How to
OutputColour modeNote
Website, social media, screen PDFRGB (sRGB)Brighter colours, smaller files
Book, magazine, brochure on an offset pressCMYKConvert with the printer’s profile, often Coated FOGRA39 in India and Europe
Wedding album at a photo labUsually RGB (sRGB) JPEGPhoto labs print from RGB; ask the lab
Logo with a brand colourSpot colour (Pantone) or CMYKSpot inks match exactly; CMYK is cheaper
Table 2. When to use RGB and when to use CMYK.
  • Keep photos in RGB while editing; convert to CMYK at export with the printer’s profile.
  • Set the profile in Edit, Colour Settings and in the PDF export.
Cham tip

Ask the printer two questions before you start: which profile, and what total ink limit.

Cham task
  1. Ask a local printer which CMYK profile they use.
  2. Set it in Colour Settings.
  3. Export one PDF converted to that profile.
Quiz

Black, rich black and ink limits

Definition

Black text should be 100 percent K only, so it prints sharp. Large black areas look richer with some cyan, magenta and yellow added, called rich black. Never use all four inks at 100 percent: too much ink smudges and dries badly.

How to
100 KPlain black: text and thin lines40 C 30 M 30 Y 100 KRich black: large black areas100 C 100 M 100 Y 100 KAvoid: 400% ink, smudges
Figure 3. Black in print. Use 100 K for text, a rich black for big areas, and never four colours at 100 percent.
  • Most presses limit total ink to about 300 percent; ask yours.
  • Small text in rich black can blur if the plates move slightly.
Cham tip

Make two black swatches in every print document: Text Black (100 K) and Rich Black. Use them on purpose.

Cham task
  1. Create a 100 K swatch and a rich black swatch.
  2. Fill two large boxes, one with each.
  3. Print and compare the depth of black.
Quiz
In a magazine

A magazine cover with a deep black background uses rich black for the background and 100 K for the small text on it.

In a portfolio

A photography portfolio is checked with Proof Colours, then the most saturated images are adjusted so they survive CMYK.

End of 04 · RGB and CMYKNext: 05 · Print ready
06 · Questions

Questions beginners ask

What is bleed in printing?

Bleed is extra image or colour, usually 3 mm, that extends past the trim edge so no white line shows after the paper is cut.

What is a slug in InDesign?

An area outside the bleed for job information such as the file name, date and notes. It is cut away after printing.

What is the difference between margin and bleed?

Margins are inside the page and keep content safely away from the edge. Bleed is outside the page and lets edge images run off.

Should I design in RGB or CMYK?

RGB for screens and many photo labs; CMYK for offset printing of books, magazines and brochures. Convert to CMYK at export with the printer’s profile.

What resolution do I need for print?

300 ppi at the final printed size for books, magazines and albums.

What is rich black?

Black made with some cyan, magenta and yellow under 100 percent black, used for large black areas so they look deep. Use plain 100 K for text.

07 · Further reading

Further reading

  • Ambrose, G. and Harris, P. (2010) The production manual: A graphic design handbook. 2nd edn. Lausanne: AVA Publishing.
  • Fraser, B., Murphy, C. and Bunting, F. (2004) Real world color management. 2nd edn. Berkeley: Peachpit Press.
© 2026 Creative Hut Academy. Written by Abin Alex and Anu Joseph. Drafted with AI assistance. Last updated 13 November 2026. To copy, republish, translate or adapt any part of it, you need written permission. Ask through the contact page. Found a mistake? Write to director@creativehut.org.
More guides in the Library →
Learn this hands on

Make this your craft at Creative Hut Academy

Creative Hut Academy in Mattakkara, Kottayam, Keralam teaches photography, cinematography, editing, sound and AI filmmaking in one-year residential diplomas. Students come from across India.

Want to talk? Message us on WhatsApp, or ask Cham, our AI mentor, a study doubt.