Opens in a new tab
EST. 2007
ADMISSIONS OPEN
Apply Now
← Creative Hut Library
Design · Typography

Typography

A Guide for Designers
10 min read6 questions

By Abin Alex and Anu Joseph

Creative Hut Academy Library · Updated 15 November 2026

Abstract

A guide to typography for designers, photographers and filmmakers who make posters, books, websites and AI images. It explains typeface and font, the anatomy of a letter, how typefaces are classified, how type is measured, kerning, tracking, leading and line length, font weights, alignment and justification, how to build hierarchy with a type scale and size tokens, how to choose and pair fonts and check their licences, which free font families to start with, including fonts for Malayalam, Hindi and Tamil, and how to keep type legible and accessible. A final chapter shows how to handle type in AI design: generate the image without text, then set real type.

Keywords: typography, typography basics, typeface and font, anatomy of type, type classification, kerning and tracking, leading and line height, type scale, font pairing, font weights, align left and justify, size tokens, free Google Fonts, Malayalam fonts, legibility and readability, typography in AI design

01 · Typography basics

What is typography, and how is a typeface different from a font?

Short answer. Typography is the craft of arranging type so words are easy to read and carry the right voice. A typeface is the design, such as Garamond; a font is one style or file of it, such as Garamond Bold Italic; and weights from 100 to 900 give each family its range.

What typography does

Definition

Typography is the craft of choosing, sizing and arranging letters so a text is readable, clear in its order and right in tone. It covers the typeface, size, spacing, line length, alignment and hierarchy.

How to
  • Typography began with movable metal type. Johannes Gutenberg printed his Bible in Mainz in the 1450s, and many terms still come from metal type, such as leading and font.
  • Upper case and lower case come from the two type cases on a compositor’s desk: capitals sat in the upper case, small letters in the lower case.
  • Type does three jobs at once: it makes text readable, it shows what to read first, and it sets a mood, formal, friendly, technical or playful.
  • Good typography goes unnoticed when it works: the reader sees the message, not the letters.
  • Photographers and filmmakers meet type on portfolio books, posters, title cards, subtitles, thumbnails, social posts and websites.

Read a page as a designer

  1. Pick a poster, a book page or a website.
  2. Write down what you read first, second and third.
  3. Note which choice made that order: size, weight, colour or space.
Cham tip

Before you choose a font, decide what the reader must read first. Typography serves the order of reading.

Cham task
  1. Collect three printed items: a book, a poster and a menu.
  2. Mark the first, second and third thing your eye reads on each.
  3. Write the type choice that created each step.
Quiz

Typeface, font, family and style

Definition

A typeface is the design of a set of letters, such as Helvetica. A font is one style and weight of it, such as Helvetica Bold, usually one file. A type family is all the styles of one typeface together.

How to
  • In metal type, a font was one size and one style of a typeface, for example 12 point Garamond Italic. In digital type the size no longer matters, so a font usually means one style file.
  • Styles vary in weight (Thin to Black), width (Condensed to Extended) and posture (upright roman, or italic and oblique).
  • A true italic has redrawn letter shapes, often based on handwriting. An oblique is the upright letter slanted, common in sans serif families.
  • Weights have standard numbers: 100 Thin, 200 Extra Light, 300 Light, 400 Regular, 500 Medium, 600 Semibold, 700 Bold, 800 Extra Bold, 900 Black.
  • A superfamily holds related serif, sans serif and often mono designs made to work together. Noto is one, and it also covers most Indian scripts.
TermMeaningExample
TypefaceThe designGaramond
FontOne style or file of the typefaceGaramond Bold Italic
FamilyAll styles of one typefaceGaramond Regular to Bold Italic
StyleA variation within the familyLight, Italic, Condensed
SuperfamilyRelated serif, sans and mono designsNoto Serif, Noto Sans, Noto Sans Mono

Table 1. Typeface, font, family and style.

In InDesign or Illustrator

  1. Select the text and open the Character panel (Ctrl+T on Windows, Cmd+T on Mac).
  2. Choose the family in the first menu.
  3. Choose the style, such as Bold or Italic, in the second menu.

In Figma

  1. Select the text layer.
  2. Choose the family in the Typography section of the right panel.
  3. Choose the weight or style from the menu beside it.
Cham tip

Avoid faux bold and faux italic, the buttons that fake a style the family does not have. Fake styles look smudged or slanted; choose a real style instead.

Cham task
  1. Open the font menu in any design app.
  2. Find one family with at least six styles.
  3. List each style with its weight number.
Quiz

Weights and styles: the Poppins family

Definition

Weight is the thickness of the strokes, numbered from 100 Thin to 900 Black. A complete family such as Poppins draws every weight in an upright and an italic style, so one family holds 18 fonts, enough for a whole design.

How to
WeightNameSample, Inter at 26 pxUse100ThinDisplay only, very large200Extra LightDisplay, large titles300LightLarge headlines, quotes400RegularBody text500MediumSubheads, UI labels600SemiboldSubheads, buttons700BoldHeadlines, emphasis800Extra BoldPosters, big titles900BlackPosters, short words
Figure 1. The nine standard weights, from 100 Thin to 900 Black, shown in Inter.
WeightUprightItalicGood for
100ThinThin ItalicVery large display words
200ExtraLightExtraLight ItalicLarge, quiet titles
300LightLight ItalicPull quotes, large intros
400RegularItalicBody text and captions
500MediumMedium ItalicLabels, buttons, small subheads
600SemiBoldSemiBold ItalicH2 and H3 headings
700BoldBold ItalicH1 and headlines
800ExtraBoldExtraBold ItalicPoster titles
900BlackBlack ItalicShort, loud poster words

Table 2. The Poppins family: nine weights, each with an italic, 18 fonts in all.

  • Poppins is a free geometric sans serif from the Indian Type Foundry. It covers Latin and Devanagari, so one family can set English and Hindi.
  • The number is the same in every family, but the names vary: SemiBold, Semibold and DemiBold all mean 600.
  • Weights 100 and 200 have hairline strokes that break up at small sizes and on rough paper. Keep them for large display text.
  • Use two or three weights in one design, for example 400 for text, 600 for subheads and 700 for headlines.
  • In CSS the weight is a number: font-weight: 600 gives SemiBold, if that font file is loaded. A variable font holds the whole range in one file and also allows in-between weights such as 450.

In InDesign or Photoshop

  1. Select the text and open the Character panel.
  2. Choose Poppins in the family menu.
  3. Open the style menu beside it: all 18 styles are listed from Thin to Black Italic.

On Google Fonts

  1. Open the Poppins page.
  2. Scroll to Styles to preview every weight with your own words.
  3. Click Get font, then Download all, and install the files.
Cham tip

Name weights by their number, not their word. The number 600 means the same thing in every family; the word does not.

Cham task
  1. Download Poppins from Google Fonts and install it.
  2. Set the word PORTFOLIO in all nine weights, one under the other.
  3. Mark the weights you would use for a headline, a subhead and body text.
Quiz
In print

A portfolio book can use one family in three styles: Regular for text, Italic for captions and Bold for chapter titles.

On screen

A website loads only the styles it uses, such as 400 and 700, because every extra font file slows the page.

End of 01 · Typography basicsNext: 02 · Anatomy of type
02 · Anatomy of type

What are the parts of a letter?

Short answer. Letters sit on a baseline and are measured against lines such as the x-height and cap height. Each letter is built from named parts such as stems, bowls, counters, serifs and terminals.

The guide lines of type

Definition

Type is drawn on invisible guide lines: the baseline, where letters sit; the mean line, at the top of lowercase letters; the cap height, at the top of capitals; and the ascender and descender lines, at the top of letters like h and the bottom of letters like p.

How to
Cap heightx-heightBaselineDescender lineAscender lineStemBowlEarTerminalAscenderShoulderSerifDescenderCounterLinkLoop
Figure 2. The guide lines and main parts of a letter, set in TeX Gyre Pagella, an open-source font in the Palatino style.
  • The x-height is the height of lowercase letters without ascenders, from the baseline to the mean line. It is named after the letter x.
  • Two fonts at the same point size can look very different in size, because their x-heights differ. A large x-height reads bigger and clearer on screens.
  • Ascenders often rise a little above the cap height, so a lowercase h can be taller than a capital H.
  • Round letters such as o and s dip slightly below the baseline and rise above the mean line. This overshoot makes them look the same size as flat letters.

In InDesign

  1. Set the word Typography twice at 72 pt, in two different fonts.
  2. Drag horizontal guides from the top ruler to the baseline and to the top of the x.
  3. Compare the x-heights: the font with the taller x looks bigger.
Cham tip

When two fonts look mismatched at the same size, compare x-heights, not point sizes, and adjust the size until the x-heights match.

Cham task
  1. Write the word Hamburgefonts by hand on lined paper.
  2. Draw the baseline, mean line, cap height, ascender and descender lines.
  3. Mark the x-height.
Quiz

Parts of a letter

Definition

The parts of a letter have names taken from the body and from building: a stem is the main vertical stroke, a bowl is a curved stroke that encloses space, the counter is that enclosed space, and a serif is the small stroke at the end of a main stroke.

How to
PartWhat it isFind it in
StemMain vertical strokel, T, h
SerifSmall finishing stroke at the end of a strokeT, h in a serif font
BracketCurved joint between a serif and the stemGaramond and other old style serifs
BowlCurved stroke that encloses a spaceb, d, o, p
CounterSpace inside a letter, closed or partly openo, e, a, n
ApertureOpening of a partly closed counterc, e, a, s
CrossbarHorizontal stroke across or between stemsA, H, e, f, t
AscenderPart of a lowercase letter above the x-heightb, d, h, k, l
DescenderPart that falls below the baselineg, j, p, q, y
ShoulderCurved stroke leaving a stemh, m, n
EarSmall stroke at the top right of a two-storey gg in many serif fonts
LinkStroke joining the two bowls of a two-storey gg
LoopLower bowl of a two-storey gg
TerminalEnd of a stroke without a serif: ball, tapered or flata, c, f, r, y
SpineMain curved stroke of the SS, s
ApexPoint where two strokes meet at the topA
SwashDecorative extended strokeScript and italic capitals
LigatureTwo or more letters joined as one shapefi, fl, ff

Table 3. Parts of a letter.

  • Stress is the direction of the thickest parts of round letters. Old style serifs have slanted stress, like a pen held at an angle; modern serifs have upright stress.
  • Contrast is the difference between thick and thin strokes. Didone faces have strong contrast; most sans serifs have little.
  • Open apertures and large counters keep small text clear on screens and in print.

In Illustrator

  1. Type a word at 200 pt and choose Type > Create Outlines.
  2. Select single parts with the Direct Selection tool.
  3. Colour the stems, bowls and serifs differently and label them.
Cham tip

Learn the parts by drawing them. Once you can name a bowl or a terminal, you can explain why two fonts feel different.

Cham task
  1. Set the word Typography in a serif and in a sans serif.
  2. Mark the stem, bowl, counter, ascender and descender on each.
  3. Write which parts differ most.
Quiz
In print

Book typefaces with open counters and moderate contrast stay clear at 10 or 11 pt on paper.

On screen

The thin hairlines of a high-contrast Didone can break up on a phone at small sizes, so keep such faces for large headlines.

End of 02 · Anatomy of typeNext: 03 · Type classification
03 · Type classification

How are typefaces classified?

Short answer. Typefaces are grouped by shape and history: serif groups (humanist, garalde, transitional, didone and slab), sans serif groups (grotesque, neo-grotesque, geometric and humanist), and others such as script, display, blackletter, monospace and non-Latin scripts.

Serif and sans serif groups

Definition

Classification sorts typefaces by shared features such as serifs, contrast and stress. The best-known system was proposed by Maximilien Vox in 1954 and adopted by ATypI in 1962; it gave names such as garalde and didone.

How to
GaraldeOld style serif, 16th centuryLow contrast, slanted stressTransitionalSerif, 18th centuryMore contrast, upright stressDidoneModern serif, about 1800Strong contrast, hairline serifsSlab serifMechanistic, 19th centuryThick block serifsNeo-grotesqueSans serif, 1950sEven strokes, closed aperturesHumanist sansSans serif, pen-basedOpen apertures, slight contrastGeometric sansSans serif, 1920sCircles and straight linesScriptCursive, calligraphicJoined, pen-like strokes
Figure 3. Eight common classes, each shown with the letters Ag in an open-source font of that style.
ClassPeriodFeaturesExamples
Humanist serif (Venetian)15th century, VeniceLow contrast, slanted crossbar on e, pen-madeJenson, Centaur
Garalde (old style)16th centuryModerate contrast, slanted stress, bracketed serifsGaramond, Bembo, Sabon
Transitional18th centuryMore contrast, upright stress, sharper serifsBaskerville, Times New Roman
Didone (modern)Late 18th centuryStrong contrast, hairline unbracketed serifsBodoni, Didot, Walbaum
Slab serif (mechanistic)19th century onwardThick block serifs, low contrastClarendon, Rockwell
Grotesque19th and early 20th centuryEarly sans, some contrast, quirky shapesAkzidenz-Grotesk, Franklin Gothic
Neo-grotesque1950sEven strokes, closed apertures, neutralHelvetica, Univers
Geometric sans1920s onwardBuilt from circles and straight linesFutura, Avenir
Humanist sans1920s onwardPen-based proportions, open aperturesGill Sans, Frutiger, Optima

Table 4. Serif and sans serif classes.

  • Serif or sans serif is the first question. Then look at contrast, stress, the shape of the serifs and the apertures.
  • No system is perfect. Many new typefaces mix features, so a class tells you the family resemblance, not a fixed rule.

Identify a typeface

  1. Look at the ends of the strokes: no serifs, bracketed, hairline or slab.
  2. Look at an o: is the thin part on a slant (old style) or at the top and bottom (modern)?
  3. Compare thick and thin strokes, then find the closest class in Table 4.
Cham tip

Choose the class for the job: garaldes for long reading, didones for fashion headlines, neo-grotesques for clean signs and interfaces.

Cham task
  1. Find five magazines or websites.
  2. Name the class of each headline and body font.
  3. Note which classes appear most in fashion, news and technology.
Quiz

Script, display, blackletter and Indian scripts

Definition

Beyond serif and sans serif there are script faces based on handwriting, display faces made for large sizes, glyphic faces carved like inscriptions, blackletter from medieval Europe, monospaced faces in which every character has the same width, and fonts for non-Latin scripts such as Devanagari and Malayalam.

How to
ClassFeaturesUse
ScriptJoined or flowing, based on pen or brushInvitations, logos, short titles
DisplayBuilt for large sizes, often decorativePosters, film titles, packaging
GlyphicCarved, chiselled shapes from inscriptionsMonuments, classic titles (Trajan, Albertus)
BlackletterDense, broken strokes from medieval manuscriptsCertificates, newspaper mastheads
MonospaceEvery character the same widthCode, screenplays, tables
Non-LatinFonts for other writing systemsDevanagari, Malayalam, Tamil, Arabic, Chinese

Table 5. Other classes.

  • Screenplays are traditionally set in Courier 12 pt, a monospaced slab serif, so one page runs roughly one minute of screen time.
  • Gutenberg’s Bible was set in a blackletter style called textura.
  • Indian scripts are abugidas: each consonant carries a vowel sound, and vowel signs attach above, below or beside it. Devanagari letters hang from a headline called the shirorekha.
  • Many Indian-language fonts need more line height than Latin fonts, because vowel signs stack above and below the letters.
  • The Noto family covers most Indian scripts with matching Latin styles, which helps when a poster mixes English with Malayalam or Hindi.

Set a bilingual title

  1. Pick a Latin font and a Malayalam or Devanagari font from one family, such as Noto Sans and Noto Sans Malayalam.
  2. Set both lines, then scale the Indian-language line until its letters look as tall as the Latin x-height.
  3. Increase the line spacing until no vowel sign touches the line above.
Cham tip

Use script and display faces for a few words only. A whole paragraph in script is tiring to read.

Cham task
  1. Make a title card with your name in English and in your mother tongue.
  2. Match the visual size of both lines.
  3. Check that no letter or vowel sign touches another line.
Quiz
In a film title

A period film may use a garalde or a blackletter title to suggest its era, while a thriller often uses a condensed sans serif.

In a bilingual poster

A Kerala event poster can pair Noto Serif Malayalam with Noto Serif, so both languages share one voice.

End of 03 · Type classificationNext: 04 · Measuring type
04 · Measuring type

How is type measured, and what is line height?

Short answer. Type is measured in points in print and in pixels or rem on screens. Line height, or leading, is the distance from one baseline to the next, usually about 120 to 150 percent of the type size for body text.

Points, picas, pixels and the em

Definition

A point is 1/72 of an inch in digital design, and 12 points make a pica. Point size measures the whole body of the type, not the visible letter. On screens CSS uses pixels, where 1 px is 1/96 of an inch, so 12 pt equals 16 px.

How to
UnitEqualsUsed in
Point (pt)1/72 inchPrint, InDesign, Photoshop
Pica (p)12 points, 1/6 inchPrint layout widths
Pixel (px)1/96 inch in CSSScreens and the web
EmThe current type sizeSpacing, kerning, CSS
RemThe base size of a web pageResponsive web type

Table 6. Units of type measurement.

  • The em equals the current type size: in 16 px type, 1 em is 16 px. Kerning and tracking in design apps are measured in thousandths of an em.
  • Rem means root em, a size based on the page’s base size, so text grows when a reader changes the browser setting.
  • Because point size measures the body, two fonts at 12 pt can show different letter heights. Judge size by eye and by x-height.
  • Common print sizes: body text 9 to 12 pt, captions 7 to 9 pt, headings 14 pt and up. On screens, 16 px is a common minimum for body text.

In InDesign

  1. Open Edit > Preferences > Units & Increments (InDesign > Settings on a Mac).
  2. Set Type to Points.
  3. Set the body size in the Character panel, for example 10 pt.

In CSS

  1. Leave the base size on html at 100 percent, which is 16 px in most browsers.
  2. Size text in rem, for example 1.25rem for 20 px.
  3. Test by changing the browser’s text size.
Cham tip

Print a test page before you fix the body size. Type that looks large on a monitor often prints small.

Cham task
  1. Set one paragraph at 9, 10, 11 and 12 pt.
  2. Print the page at 100 percent.
  3. Choose the most comfortable size and note it.
Quiz

Line height and font metrics

Definition

Line height, called leading in print, is the distance from one baseline to the next. The name comes from strips of lead that printers placed between lines of metal type. Body text usually reads best at about 120 to 150 percent of the type size.

How to
AscentCap heightx-heightBaselineDescentLine heightline-height: 1.5Content areaascent + descentHalf-leadingHalf-leadingThe line box = content area + half-leading above and below. Font size sets the em; the font file sets ascent and descent.
Figure 4. How a screen line is built: the font’s ascent and descent make the content area, and the extra line height is split above and below as half-leading.
  • In print, leading is written as size over leading: 10/14 means 10 pt type on 14 pt leading.
  • In CSS, a line-height without a unit, such as 1.5, scales with the text size and is the safest choice.
  • Longer lines need more leading so the eye can find the next line. Large headlines need less, often 100 to 120 percent.
  • Ascent and descent come from the font file, so the same line height can look different in two fonts.

In InDesign

  1. Select the paragraph.
  2. In the Character panel set the size and leading, for example 10 pt and 14 pt.
  3. Type a fixed number instead of Auto leading, which is 120 percent of the size.

In Photoshop

  1. Select the text layer and open Window > Character.
  2. Set the leading in the field beside the size.
  3. Check the spacing at 100 percent zoom.

In CSS

  1. Set the body line-height to 1.5.
  2. Set headings to 1.1 or 1.2.
  3. Use values without units so they scale.
Cham tip

If readers lose their place moving to the next line, add leading before you shrink the text.

Cham task
  1. Set one paragraph at 10/10, 10/12, 10/14 and 10/18.
  2. Read each aloud once.
  3. Note which spacing was fastest and most comfortable.
Quiz
In print

A photography book might set captions at 8/11 pt and body text at 10/14 pt.

On screen

A web article usually sets body text at 16 to 18 px with a line height around 1.5.

End of 04 · Measuring typeNext: 05 · Spacing and alignment
05 · Spacing and alignment

What are kerning, tracking, alignment and justification, and how long should a line be?

Short answer. Kerning adjusts the space between two letters, tracking adjusts spacing across a word or line, and alignment sets which edges are straight. Align left keeps a ragged right edge; justify straightens both edges. Keep body lines about 45 to 75 characters long.

Kerning and tracking

Definition

Kerning adjusts the space between a particular pair of letters, such as A and V. Tracking, or letter-spacing, adds or removes space evenly across a group of letters. Most design apps measure both in thousandths of an em.

How to
KerningTrackingLeadingWithout kerning: gapsKerned pairs: even rhythmTracking 0: capitals feel tightTracking +120: capitals breatheGood type sets the voiceof the page before a wordis read.Leading 100%: lines crowdGood type sets the voiceof the page before a wordis read.Leading 145%: easy to read
Figure 5. Kerning closes awkward gaps in pairs such as AV and To; tracking opens up capitals; leading sets the distance between lines.
  • Fonts carry built-in kerning pairs. Metrics kerning uses them; optical kerning lets the app judge spacing from the letter shapes, which helps with fonts that have poor pairs.
  • Capitals and small capitals read better with a little extra tracking, about 5 to 10 percent of the size.
  • Large headlines often look better with slightly tighter tracking. Body text should keep the default.
  • Never track lowercase body text loosely to fill a line; it breaks up the word shapes.

In InDesign or Illustrator

  1. Click between two letters with the Type tool.
  2. Press Alt with the Left or Right arrow (Option on a Mac) to kern by 20/1000 em.
  3. Select a whole word and use the same keys to change tracking.

In Photoshop

  1. Open Window > Character.
  2. Choose Metrics or Optical in the kerning menu, or click between two letters and type a value.
  3. Select a word and set the tracking field.

In CSS

  1. Use letter-spacing, for example 0.08em for capitals.
  2. Leave font-kerning at its default, auto.
  3. Avoid letter-spacing on body text.
Cham tip

Kern headlines at their final size, and turn the text upside down to judge the gaps as shapes rather than words.

Cham task
  1. Type the words WAVY TOYS at 120 pt.
  2. Kern every pair until the gaps look even.
  3. Compare with the unkerned version.
Quiz

Line length and alignment

Definition

Line length, or measure, is how many characters fit on one line. About 45 to 75 characters, with around 66 as a good aim, reads comfortably for body text. Alignment can be flush left, centred, flush right or justified.

How to
AlignmentLooksUse forWatch out for
Flush left, ragged rightStraight left edge, uneven rightMost body text, screensA very jagged right edge
CentredBoth edges unevenShort titles, invitationsLong paragraphs
Flush rightStraight right edgeShort captions, numbers in tablesLong text
JustifiedBoth edges straightBooks, newspapers with hyphenationRivers and wide word gaps

Table 7. Alignment options.

  • The 45 to 75 character range is a long-standing guideline from book typography.
  • Rivers are white channels running down justified text, caused by wide word spaces. Hyphenation and a longer line reduce them.
  • A single word alone on the last line of a paragraph is often called a widow or a runt. Fix it by editing the text or adjusting the line breaks.
  • On phones, lines often hold only 35 to 45 characters, which is acceptable for short reading.

In InDesign

  1. Set the text frame or column width so a body line holds about 60 to 70 characters.
  2. Choose Align Left in the Paragraph panel for most text.
  3. For justified text, turn on Hyphenate and check for rivers at 100 percent.

In CSS

  1. Limit the text width with max-width: 65ch.
  2. Use text-align: left for body text.
  3. Avoid text-align: justify on narrow phone screens.
Cham tip

Count characters, not centimetres. Type size, font and column width together set the measure.

Cham task
  1. Copy one paragraph into three columns of different widths.
  2. Count the characters on a typical line of each.
  3. Choose the column that reads most easily and note its count.
Quiz

Alignment and justification

Definition

Alignment decides which edge of a paragraph is straight. Align left, centre and right keep even word spaces and leave one or both edges ragged. Justify stretches the word spaces so both edges are straight; left, centre, right and full justify only decide where the last line sits.

How to
Align: one straight edge (or none), word spaces stay evenJustify: both edges straight, word spaces stretch. The name says where the last line goesAlign leftFlush left, ragged rightAlign centreBoth edges raggedAlign rightFlush right, ragged leftLeft justifyJustify, last line leftCentre justifyJustify, last line centredRight justifyJustify, last line rightFull justifyJustify all linesAlign left is notleft justify.Align left: raggedright edge.Left justify: bothedges straight, onlythe last line sits left.Orange lines mark straight edges. In InDesign and Photoshop these are the seven alignment buttons in the Paragraph panel.
Figure 6. The seven alignment options: three aligns, and four justify modes that differ only in the last line.
OptionLeft edgeRight edgeLast lineUse for
Align leftStraightRaggedLeftBody text, captions, websites
Align centreRaggedRaggedCentredTitles, invitations, short quotes
Align rightRaggedStraightRightShort captions to the left of a photo, numbers
Left justifyStraightStraightLeftBooks, magazines, newspaper columns
Centre justifyStraightStraightCentredRare; formal certificates
Right justifyStraightStraightRightRare; right-hand captions
Full justifyStraightStraightStretchedOne-line titles spread to a set width

Table 8. Align or justify: what each option does.

  • Align left and left justify are not the same. Align left keeps natural word spaces and a ragged right edge. Left justify straightens both edges; only its last line is short, on the left.
  • Justified text needs hyphenation and a line of about 60 characters or more, or the stretched spaces open into rivers.
  • Full justify stretches the last line too, so a last line of two words shows a huge gap. Use it only for single-line titles.
  • InDesign adds Align towards spine and Align away from spine, which swap left and right on facing pages of a book.
  • Malayalam, Hindi and Tamil words are often long, so justified Indian-language text can show wide gaps. Check every line.

In InDesign

  1. Select the paragraph and open the Paragraph panel (Ctrl+Alt+T on Windows, Cmd+Option+T on Mac).
  2. Click one of the alignment buttons, or press Ctrl+Shift (Cmd+Shift) with L, C or R to align, J for left justify or F for full justify.
  3. For justified text, keep Hyphenate on and check for rivers.

In Photoshop

  1. Draw a text box to make paragraph text; point text only offers the three aligns.
  2. Open Window > Paragraph.
  3. Click an align or justify button.

In CSS

  1. Use text-align: left, center, right or justify.
  2. Set the last line of justified text with text-align-last.
  3. Add hyphens: auto, with the page language set, before you justify.
Cham tip

For body text on screens, choose Align left. Justify only when you can hyphenate and check every line by eye.

Cham task
  1. Set one 80-word paragraph in all seven alignment options.
  2. Mark the rivers and wide gaps in the justified versions.
  3. Pick one option for a photo caption and one for a book page, and write why.
Quiz
In print

A portfolio book with one wide column of 11 pt text often needs a narrower text frame, or two columns, to keep lines near 65 characters.

On screen

Articles that run the full width of a laptop screen are hard to read; a 65ch column fixes this.

End of 05 · Spacing and alignmentNext: 06 · Hierarchy and type scale
06 · Hierarchy and type scale

How do you build hierarchy with size, weight and a type scale?

Short answer. Hierarchy tells the reader what to read first. Build it with a few clear steps in size, weight, colour and space, take the sizes from a type scale, and limit the design to two or three weights.

Contrast, weight and hierarchy

Definition

Typographic hierarchy is the order in which the reader takes in text: title, then subheading, then body, then captions. It is made with contrast in size, weight, colour, case, spacing and position.

How to
LevelWeightJob
HeadlineBold (700)Grabs attention and names the topic
SubheadingMedium or Semibold (500 to 600)Guides the reader through sections
BodyRegular (400)Comfortable long reading
Captions and labelsRegular or Medium, smallerSupport images and data

Table 9. A simple three-weight plan.

  • If everything is bold, nothing stands out. Use weight where the reader must stop.
  • Two clear steps are better than five weak ones: make each level obviously different.
  • Space is part of hierarchy: more space above a heading than below ties it to the text it introduces.
  • Use two or three weights, for example 400 and 700, or 400, 500 and 700. Many weights at once look unplanned.

In InDesign

  1. Create Paragraph Styles for Headline, Subheading, Body and Caption.
  2. Set the size, weight, leading and space before or after in each style.
  3. Apply the styles instead of formatting text by hand.

In Figma or Canva

  1. Make one text sample for each level.
  2. Save them as text styles in Figma or in the Brand Kit in Canva.
  3. Use only these styles in the design.

Next: build these levels as reusable styles with the Paragraph and Character Styles guide, including an InDesign script that creates them for you.

Cham tip

Squint at your layout. If you cannot see the order of reading through blurred eyes, the hierarchy is too weak.

Cham task
  1. Take a poster with all its text at one size and weight.
  2. Rebuild it with three levels using only size and weight.
  3. Ask a friend what they read first.
Quiz

Type scales and ratios

Definition

A type scale is a set of sizes made by multiplying a base size by a fixed ratio. With a base of 16 px and a ratio of 1.25, the sizes are 16, 20, 25, 31, 39 and 49 px. Using only these sizes keeps a design consistent.

How to
Caption13 pxBody16 pxH420 pxH325 pxH231 pxH139 pxDisplay49 pxDisplay XL61 pxBase 16 px × 1.25 for each step up, ÷ 1.25 for each step downSizes are rounded. Pick one ratio and use only the sizes it gives.
Figure 7. A type scale from a 16 px base with a ratio of 1.25.
RatioNameFeel
1.125Major secondGentle, for dense interfaces
1.2Minor thirdCalm, good for articles
1.25Major thirdClear and versatile
1.333Perfect fourthStrong, for editorial pages
1.5Perfect fifthDramatic, for posters
1.618Golden ratioVery dramatic, few levels

Table 10. Common type scale ratios, named after musical intervals.

RoleSizeWeightCaseLetter spacing
Display49 pxBoldSentence caseMinus 1 percent
H139 pxBoldSentence caseMinus 0.5 percent
H231 pxSemiboldSentence case0
H325 pxSemiboldSentence case0
Body16 pxRegularSentence case0
Caption13 pxRegularSentence casePlus 1 percent
Label13 pxMediumCapitalsPlus 8 percent

Table 11. A sample scale with roles, from a 16 px base and a ratio of 1.25.

TokenSizeTypical role
font-size-10012 pxFine print, legal text
font-size-20014 pxCaptions and labels
font-size-30016 pxBody text on screens
font-size-40018 pxLead paragraph
font-size-50020 pxSmall subheads
font-size-60024 pxH4
font-size-70028 pxH3
font-size-80032 pxH2 on phones
font-size-90040 pxH2
font-size-100048 pxH1
font-size-110060 pxDisplay
font-size-120072 pxLarge display and posters

Table 12. A sample set of size tokens. The numbers count in hundreds so a new size can fit between two steps, such as font-size-450.

  • A design token is a named value stored once and used everywhere, such as font-size-300 = 16 px. Figma calls them variables; CSS calls them custom properties.
  • Change a token once and every heading or caption that uses it changes with it.
  • Name tokens by step, not by size or use, so the scale can grow without renaming: font-size-1200, not big-title-72.
  • In CSS a token looks like --font-size-300: 1rem; and is used as font-size: var(--font-size-300).
  • The musical names come from the ratios between notes: a perfect fifth is 3:2, which is 1.5.
  • On websites, the CSS clamp() function lets each size grow smoothly between a phone size and a desktop size.

Build a scale

  1. Choose a base size: 16 px for screens, or 10 to 11 pt for print.
  2. Choose one ratio from Table 10, then multiply up and divide down.
  3. Round the results and save each one as a named token, such as font-size-300.
Cham tip

Small screens need a smaller ratio. Many sites use 1.2 on phones and 1.25 or 1.333 on desktops.

Cham task
  1. Build a scale from 16 px with the ratio 1.25, and another with 1.5.
  2. Set a sample page with each.
  3. Choose the one that suits a photography portfolio.
Quiz
In print

An exhibition catalogue can use a 1.333 scale: 10 pt body, 13 pt subheads, 18 pt section titles and a 32 pt cover title.

On screen

Creative Hut’s own website defines its type sizes once, as shared design tokens, so every page uses the same scale.

End of 06 · Hierarchy and type scaleNext: 07 · Choosing and pairing fonts
07 · Choosing and pairing fonts

How do you choose and pair typefaces?

Short answer. Choose type for the message, the reader and the medium, then pair at most two families: one for headings and one for text, with clear contrast but shared proportions. Always check the licence.

Choosing a typeface for the job

Definition

Choosing a typeface means matching its voice and its practical features to the project: the tone of the message, how long the text is, where it will be read, which languages it must cover and how many styles you need.

How to
NeedLook forClasses to try
Long reading in printModerate contrast, open countersGaralde, transitional serif
Long reading on screenLarge x-height, open aperturesHumanist sans, sturdy serif
Luxury and fashionHigh contrast, elegant shapesDidone
Technical and modernEven strokes, clear figuresNeo-grotesque, geometric sans
Friendly and warmRounded or humanist shapesHumanist or rounded sans
Indian languagesFull script support with matching LatinNoto families

Table 13. Choosing type by job.

  • Check the character set: figures, currency signs such as ₹, accented letters and every script you need.
  • A family with Regular, Italic, Bold and Bold Italic covers most text needs.
  • Test with real words from the project, not dummy text.

Test a typeface

  1. Shortlist three typefaces that fit the tone.
  2. Set the same real headline and paragraph in each.
  3. Print it, view it on a phone, then choose.
Cham tip

Choose the body typeface first. It carries most of the reading, and the headline face can then be chosen to match it.

Cham task
  1. Write one headline and one paragraph about your college.
  2. Set them in three typefaces with different tones.
  3. Write one word for the mood of each.
Quiz

Pairing typefaces

Definition

Pairing means combining two typefaces that contrast clearly but share proportions and mood, such as a serif headline with a sans serif body. Most designs need no more than two families.

How to
HeadlineBodyMood
Playfair DisplaySource Sans 3Editorial, elegant
LoraOpen SansWarm, readable
MontserratMerriweatherModern headline, bookish text
FrauncesArchivoWarm and modern, used on this website
PoppinsLatoFriendly, clean
Noto Serif MalayalamNoto SerifBilingual Malayalam and English

Table 14. Pairings from free Google Fonts.

  • Contrast with harmony: pair a serif with a sans, or a heavy display face with a quiet text face. Two similar sans serifs look like a mistake.
  • Match x-heights and widths so the two faces sit well on one line.
  • A superfamily, with serif and sans versions from one design, is the safest pairing.
  • Faces with a strong, overused voice, such as Comic Sans or Papyrus, are best avoided in professional work.

Pair two faces

  1. Choose the body face first.
  2. Pick a headline face with clear contrast: serif against sans, or heavy against light.
  3. Set a headline, subheading and paragraph together and check the mood on a phone.
Cham tip

When unsure, use one family in two weights. Contrast of weight alone can build a clean, professional page.

Cham task
  1. Pick one pairing from Table 14.
  2. Design a poster title, subtitle and three lines of text with it.
  3. Swap the headline face and compare the mood.
Quiz

Font files and licences

Definition

Fonts are software, shared or sold under a licence. OTF and TTF files are for desktop apps, WOFF2 is for websites, and a variable font holds many weights and widths in one file. Always check that the licence covers your use.

How to
Licence or sourceWhat it allowsWatch out for
SIL Open Font License (most Google Fonts)Free use, including commercial work; you may embed and share the fontYou may not sell the font file by itself
Adobe FontsUse in personal and commercial projects while your Creative Cloud plan is activeDo not send the font files to others
Bought desktop licenceUse in apps on a set number of computersWeb, app and ebook use often need separate licences
Free download sitesVaries, often personal use onlyMany fonts there are pirated or not licensed for commercial work

Table 15. Common font licences.

  • Variable fonts, part of OpenType since 2016, use axes such as weight (wght), width (wdth), optical size (opsz) and slant.
  • On websites, load only the weights you use and prefer WOFF2, which is compressed.
  • Keep a copy of the licence with every project that uses a paid font.

Install and check a font

  1. Download it from the foundry, Google Fonts or Adobe Fonts.
  2. Read the licence file in the download or on the licence page.
  3. Install it, or activate it in Adobe Fonts, then restart your design app.
Cham tip

A client logo or a film title in an unlicensed font can lead to a legal claim. Check the licence before the design is approved, not after.

Cham task
  1. Choose three fonts you like.
  2. Find the licence of each.
  3. Write whether each can be used for a paid client poster.
Quiz
In print

A wedding album designer who buys a script font for a client album should check that the licence covers commercial print work.

On screen

Each extra webfont weight is another file to download; two weights in WOFF2 keep a page fast.

End of 07 · Choosing and pairing fontsNext: 08 · Free font families
08 · Free font families

Which free font families should you start with?

Short answer. Seventeen free Google Fonts cover most design work: six sans serifs, six serif and display faces, and five families for Malayalam, Hindi and Tamil. All are free for personal and client work under open licences.

Six free sans serifs

Definition

A sans serif has no small strokes at the ends of its letters. These six free families are clean, have many weights and work on screens, posters and in print.

How to

Geometric sans

Poppins

Weights: 100 to 900, with italics (18 styles)

Use: Headings, posters and friendly brands; also sets Hindi

Download from Google Fonts

Neo-grotesque sans

Inter

Weights: 100 to 900, with italics; variable

Use: Screens, apps, websites and data

Download from Google Fonts

Geometric sans

Montserrat

Weights: 100 to 900, with italics; variable

Use: Headlines, logos and posters

Download from Google Fonts

Neo-grotesque sans

Roboto

Weights: 100 to 900, with italics; variable

Use: Apps and interfaces; the Android default

Download from Google Fonts

Humanist sans

Open Sans

Weights: 300 to 800, with italics; variable

Use: Long reading on screens

Download from Google Fonts

Humanist sans

Lato

Weights: 100, 300, 400, 700 and 900, with italics

Use: Body text and calm, corporate design

Download from Google Fonts
  • Every family here is on Google Fonts under the SIL Open Font License, so it is free for client work. Read the licence on the font page to confirm.
  • Geometric sans faces such as Poppins and Montserrat are built on circles and feel modern. Humanist faces such as Open Sans and Lato are warmer and easier for long reading.
  • Inter and Roboto were designed for screens and stay clear at small sizes.

Download and install

  1. Click Download from Google Fonts to open the font page.
  2. Click Get font, then Download all, and unzip the file.
  3. Windows: right-click the font files and choose Install. Mac: double-click and choose Install Font. Restart your design app.
Cham tip

Pick one sans serif and learn it well in three weights before you collect more fonts.

Cham task
  1. Download two sans serifs from the list.
  2. Set the same headline and paragraph in each.
  3. Choose one for a photography portfolio and write why.
Quiz

Six free serif and display faces

Definition

A serif face has small strokes at the ends of its letters and suits long reading and editorial headlines. A display face is drawn for large sizes and short words, such as a film title.

How to

High-contrast display serif

Playfair Display

Weights: 400 to 900, with italics

Use: Editorial headlines, fashion, weddings

Download from Google Fonts

Contemporary text serif

Lora

Weights: 400 to 700, with italics

Use: Book text, captions and essays

Download from Google Fonts

Sturdy text serif

Merriweather

Weights: 300 to 900, with italics

Use: Long reading on screens

Download from Google Fonts

Soft display serif

Fraunces

Weights: 100 to 900, with italics; variable

Use: Warm headlines; used on this website

Download from Google Fonts

Transitional serif

Libre Baskerville

Weights: Regular, Italic and Bold

Use: Classic book and web body text

Download from Google Fonts

Condensed display sans

Bebas Neue

Weights: One weight, capitals only

Use: Film titles, posters and thumbnails

Download from Google Fonts
  • Text serifs such as Lora, Merriweather and Libre Baskerville work at body size. Playfair Display and Fraunces are best as headlines.
  • Bebas Neue has capitals only, so use it for short titles, never for paragraphs.
  • A serif headline with a sans serif body, such as Playfair Display with Inter, is a safe starting pair.

Download and install

  1. Click Download from Google Fonts to open the font page.
  2. Click Get font, then Download all, and unzip the file.
  3. Windows: right-click the font files and choose Install. Mac: double-click and choose Install Font. Restart your design app.
Cham tip

Display faces lose their charm at small sizes. Use them at 32 px or 24 pt and above.

Cham task
  1. Download one text serif and one display face from the list.
  2. Design a film poster title with the display face.
  3. Set the credits below it in a sans serif from the previous point.
Quiz

Free fonts for Malayalam, Hindi and Tamil

Definition

Indian scripts need fonts that include every conjunct and vowel sign. The Noto families from Google cover Malayalam, Devanagari and Tamil with matching Latin, and Manjari is a popular Malayalam face made in Kerala.

How to

Malayalam sans

Noto Sans Malayalam

Weights: 100 to 900; variable

Use: Posters, subtitles and apps in Malayalam

Download from Google Fonts

Malayalam serif

Noto Serif Malayalam

Weights: 100 to 900; variable

Use: Books and long Malayalam text

Download from Google Fonts

Malayalam rounded sans

Manjari

Weights: 100, 400 and 700

Use: Friendly Malayalam headings and captions

Download from Google Fonts

Devanagari sans

Noto Sans Devanagari

Weights: 100 to 900; variable

Use: Hindi, Marathi and Sanskrit

Download from Google Fonts

Tamil sans

Noto Sans Tamil

Weights: 100 to 900; variable

Use: Tamil posters, subtitles and screens

Download from Google Fonts
  • Noto means no tofu: the empty boxes that show when a font lacks a character. Noto aims to cover every script in Unicode.
  • Manjari was designed by Santhosh Thottingal and Kavya Manohar of Swathanthra Malayalam Computing.
  • Set Malayalam text a little larger than English, about 10 percent, so its detailed letters stay clear.
  • Never type Malayalam with an old non-Unicode font: the text breaks when copied, searched or opened on another computer.

Download and install

  1. Click Download from Google Fonts to open the font page.
  2. Click Get font, then Download all, and unzip the file.
  3. Windows: right-click the font files and choose Install. Mac: double-click and choose Install Font. Restart your design app.
Cham tip

Check conjuncts with real words from your project. A font that renders English well may still break a Malayalam word.

Cham task
  1. Download Noto Sans Malayalam and Manjari.
  2. Set your name and a short Malayalam film title in each.
  3. Pair the better one with an English face from this chapter.
Quiz
In print

A Malayalam film festival poster can set the title in Noto Serif Malayalam Bold and the English line in Lora, two serifs with a similar mood.

On screen

A photographer’s portfolio website can use Inter in two weights for all text and load only those two files.

End of 08 · Free font familiesNext: 09 · Legibility and accessibility
09 · Legibility and accessibility

What makes type legible, readable and accessible?

Short answer. Legibility is how easily single letters can be told apart; readability is how comfortably a whole text can be read. Accessible type adds enough size and colour contrast for every reader, including people with low vision.

Legibility and readability

Definition

Legibility depends on the typeface: clear letter shapes, open counters and a good x-height. Readability depends on how the type is set: size, line height, line length, spacing and contrast.

How to
Neo-grotesqueIl1 and rn read almost the sameHumanist sansIl1 differ; open shapesGaralde serifSerifs separate I, l and 1
Figure 8. The I l 1 and rn m test: some neo-grotesques make these characters look alike, while humanist sans and serif faces separate them.
  • Characters that look alike, such as capital I, small l and the figure 1, cause errors in passwords, codes and signs.
  • Long passages in capitals read more slowly, because words lose their outline shapes.
  • Italic and script suit short passages; use upright roman for long reading.
  • Light weights at small sizes, and thin text on busy photographs, are the most common legibility faults.

Check legibility

  1. Type Il1 rn m 0O in the chosen font.
  2. Look at it at the final size, on paper and on a phone.
  3. Change the font or the size if any pair looks alike.
Cham tip

Never set text over a busy part of a photograph. Move it, darken that area of the image or add a solid band behind the text.

Cham task
  1. Make a poster with a white headline on a photograph.
  2. Test it at phone size from arm’s length.
  3. Fix any letter you cannot read clearly.
Quiz

Accessible type: size and contrast

Definition

Accessible type can be read by people with low vision, colour blindness or reading difficulties. The Web Content Accessibility Guidelines (WCAG) ask for a contrast ratio of at least 4.5:1 for normal text and 3:1 for large text.

How to
TextWCAG AA contrastWCAG AAA contrast
Normal text4.5:17:1
Large text (18 pt, or 14 pt bold, and above)3:14.5:1

Table 16. Minimum contrast ratios in WCAG 2.2.

  • Black on white is 21:1, the highest ratio. Light grey on white often fails.
  • Do not use colour alone to carry meaning, such as red for an error; add a word or an icon.
  • Let readers zoom: on websites, size text in rem and never block browser zoom.
  • Avoid putting important words inside images, because screen readers and translation tools cannot read them.

Check contrast

  1. Note the text colour and the background colour as hex codes.
  2. Enter them in a contrast checker, such as the WebAIM Contrast Checker.
  3. Darken the text or lighten the background until the pair passes AA.
Cham tip

Test your design in greyscale. If the text fades into the background, the contrast is too low.

Cham task
  1. Pick three text and background colour pairs from a design.
  2. Check each in a contrast checker.
  3. Fix any pair below 4.5:1.
Quiz
In print

Exhibition labels should be large enough to read from a step away, with dark text on a light card.

On screen

Film subtitles use white text with a dark outline or a shaded band, so they stay readable over bright scenes.

End of 09 · Legibility and accessibilityNext: 10 · Typography in AI design
10 · Typography in AI design

How do you handle type when you design with AI?

Short answer. AI image tools can draw short words but often misspell or distort text. The reliable way is to generate the image without text, leaving space, then set real type in a design app. Chat AI can act as an assistant for pairings and type scales, but check every suggestion.

Text inside AI images

Definition

AI image generators draw letters as shapes, not as typed text. Newer models handle short words well, but long sentences, small text and Indian scripts often come out misspelled or broken. Any text they make is a flat picture you cannot edit.

How to
  • Put the exact words in quotation marks in the prompt and keep them short, one to five words.
  • Describe the style by class and look, such as bold condensed sans serif or high-contrast serif, rather than asking for a brand-name font.
  • Say where the text goes and how big it is, for example large and centred at the top.
  • Zoom in and check every letter. AI text often has extra strokes, swapped letters or wrong accents.
  • Letters drawn by AI are not a font, so you cannot change the spelling, size or language later without generating again.
Prompt: short poster title
Cinematic poster of a lone photographer on a misty Kerala hill at sunrise. At the top centre, the title "FIRST LIGHT" in a bold, condensed sans serif, white, large. No other text, no logos, no watermark.

Generate a title in an image

  1. Write the scene first, then the exact words in quotation marks.
  2. Describe the type style, colour, size and position.
  3. Generate several versions and check the spelling at full size.
Cham tip

Treat AI text as a sketch of the layout. For anything that will be printed or published, set the final words in a real font.

Cham task
  1. Generate one poster with a two-word title inside the image.
  2. Generate the same poster with no text.
  3. Compare spelling, sharpness and how easily you can change the title.
Quiz

Generate first, set type after

Definition

The professional workflow is to ask the AI for an image with no text and clear empty space, then add the words in a design app with licensed fonts. The type stays sharp, correct, editable and on brand.

How to
1GenerateImage with no text,space left for type2PlaceIn InDesign, Photoshop,Express or Canva3Set typeReal, licensed fontsfrom your type scale4CheckSpelling, contrast,size on a phone5ExportPDF for print,PNG or JPG for screen
Figure 9. A reliable workflow for type in AI-made designs.
  • Ask for space in the prompt, for example: leave the top third as plain sky, no text.
  • Set Malayalam, Hindi and other Indian-language text in the design app with a proper font such as Noto; AI tools still make many errors in these scripts.
  • Use the same fonts and type scale on every AI-made design, so a series of posters looks like one brand.
  • Keep the editable source file of each design, in InDesign, Photoshop, Adobe Express or Canva, next to the exported image.
Prompt: image with space for type
Wide photograph of a film crew setting up lights in a studio at night, warm practical lights, shallow depth of field. Leave the top third as a plain dark background for a title. No text, no letters, no logos.

In Photoshop or Adobe Express

  1. Place the AI image as the background.
  2. Add the title with the Type tool in your chosen font, at a size from your scale.
  3. Check contrast, align the text to a grid and export.

In Canva

  1. Upload the AI image and set it as the background.
  2. Add a heading, subheading and body text from your Brand Kit.
  3. Download as PDF Print for print, or PNG for screens.
Cham tip

Write no text, no letters in every image prompt you plan to type over. Stray AI letters are hard to remove later.

Cham task
  1. Generate a poster background with empty space for a title.
  2. Set the title, date and place in a design app with a pairing from this guide.
  3. Export one version for print and one for Instagram.
Quiz

Chat AI as a typography assistant

Definition

Chat tools such as Claude, ChatGPT and Gemini can suggest font pairings, build a type scale, write CSS for it and explain why a layout feels crowded. They cannot check licences or see your final print, so treat each answer as a suggestion to test.

How to
  • Give the AI the project, audience, tone, languages and where the design will be seen.
  • Ask for free fonts with their licences named, then check that each font exists and the licence is right.
  • Ask for sizes from a type scale with a ratio, not random numbers.
  • Upload a screenshot of your layout and ask for feedback on hierarchy, spacing and contrast, then decide yourself.
Prompt: type system for a project
I am designing a [PROJECT] for [AUDIENCE], seen mostly on [PRINT OR PHONE]. Tone: [TONE]. Languages: English and [LANGUAGE]. Suggest two font pairings from Google Fonts, each with a headline face and a body face, and say why they suit the tone. For the better pairing, build a type scale from a [BASE SIZE] base with a ratio of [RATIO], listing the size, weight, line height and letter spacing for display, H1, H2, H3, body, caption and label. Name the licence of each font.

Use chat AI for type

  1. Copy the prompt, fill in the brackets and send it.
  2. Check that each suggested font exists on Google Fonts and read its licence.
  3. Set a test page with the scale and adjust it by eye.
Cham tip

AI can propose; your eye decides. Print or view the result at real size before you accept a type suggestion.

Cham task
  1. Use the prompt for a photography exhibition poster.
  2. Set the suggested pairing and scale in a design app.
  3. Change one thing the AI got wrong and write why.
Quiz
In an AI poster

For a film festival poster, generate the scene with no text, then set the film title in a condensed sans serif and the credits in a regular weight below.

In an AI film

Title cards and subtitles for an AI film are added in the editing software, so they stay sharp and can be translated.

End of 10 · Typography in AI designNext: Questions beginners ask
11 · Questions

Questions beginners ask

What is the difference between a typeface and a font?

A typeface is the design, such as Garamond. A font is one style or file of it, such as Garamond Bold Italic.

What is kerning in typography?

Kerning adjusts the space between a pair of letters, such as A and V, so the spacing looks even.

What is a good font size for body text?

About 9 to 12 pt in print and at least 16 px on screens, with a line height of about 1.4 to 1.6.

How many fonts should I use in one design?

Usually two families at most, one for headings and one for text, in two or three weights.

What are the main type classifications?

Serif groups (humanist, garalde, transitional, didone and slab), sans serif groups (grotesque, neo-grotesque, geometric and humanist), plus script, display, blackletter, monospace and non-Latin scripts.

What is the difference between align left and left justify?

Align left keeps even word spaces and a ragged right edge. Left justify stretches the word spaces so both edges are straight, and only the last line sits short on the left.

Where can I download free fonts safely?

Use Google Fonts. Every family there is free for personal and commercial work under an open licence. Avoid random free-font sites, where many fonts are pirated or for personal use only.

Can AI image tools write text correctly?

They handle short words fairly well, but long text, small text and Indian scripts often come out wrong. Generate the image without text and set the words in a design app.

12 · Further reading

Further reading

  • Ambrose, G. and Harris, P. (2011) The fundamentals of typography. 2nd edn. Lausanne: AVA Publishing.
  • Bringhurst, R. (2012) The elements of typographic style. 4th edn. Seattle: Hartley and Marks.
  • Kane, J. (2011) A type primer. 2nd edn. London: Laurence King.
  • Lupton, E. (2010) Thinking with type. 2nd edn. New York: Princeton Architectural Press.
  • Spiekermann, E. (2014) Stop stealing sheep and find out how type works. 3rd edn. San Francisco: Adobe Press.
  • W3C (2023) Web Content Accessibility Guidelines (WCAG) 2.2. World Wide Web Consortium.
© 2026 Creative Hut Academy. Written by Abin Alex and Anu Joseph. Drafted with AI assistance. Last updated 15 November 2026. To copy, republish, translate or adapt any part of it, you need written permission. Ask through the contact page. Found a mistake? Write to director@creativehut.org.
More guides in the Library →
Learn this hands on

Make this your craft at Creative Hut Academy

Creative Hut Academy in Mattakkara, Kottayam, Keralam teaches photography, cinematography, editing, sound and AI filmmaking in one-year residential diplomas. Students come from across India.

Want to talk? Message us on WhatsApp, or ask Cham, our AI mentor, a study doubt.