Opens in a new tab
EST. 2007
ADMISSIONS OPEN
Apply Now
← Creative Hut Library
Night sky · Star trails

Star Trail Photography: Location, Settings, Long Exposure and Stacking

10 min read10 questions

By Abin Alex and Anu Joseph

Creative Hut Academy Library · Updated 13 November 2026

Abstract

A guide to star trails, the circles and arcs that stars draw across a photograph as the earth turns. It covers where and when to shoot, the gear and starting settings, how to make one long exposure from a short test frame, how to stack many shorter frames, and how to focus and add a foreground. Every point gives camera steps in Manual.

Keywords: star trail photography, star trails settings, star trail stacking, long exposure night sky, pole star, astrophotography India

01 · Star trails

What are star trails?

Short answer. Curved lines in a photograph made by stars as the earth turns during a long exposure.

Definition

Star trails are the curved lines stars draw in a photograph during a long exposure. As the earth turns, every star and visible planet describes a circle or arc around the north and south celestial poles.

Key facts

  • As the earth turns, every star and visible planet in the sky describes a circle or arc around the north and south celestial poles (Cope, 2006, p. 48).
  • Pointing at the celestial pole gives circles; pointing east or west gives long, nearly straight arcs.
  • The longer the exposure, the longer the trails.
  • A short exposure keeps stars as points. The 500 or 600 rule gives the longest time before they trail.
How to

Manual (M)

  1. Fix a wide lens on a tripod and set M.
  2. Set the widest aperture, ISO 800 and 30 s for a first test frame.
  3. Look at the stars at 100 percent: points mean too short for trails.
  4. Plan a longer exposure or a stack from that test.
Cham tip

Decide circles or arcs first, then point the camera.

Cham task
  1. Find the north on a map of your location.
  2. Shoot one 30 s frame towards the north and one towards the east.
  3. Compare the curve of the stars at 100 percent.
Quiz
In photography

Draw where the pole star sits from your home, using your latitude.

In cinematography

Time-lapse cinematographers turn the same star movement into a moving shot by joining hundreds of frames.

End of 01 · Star trailsNext: 02 · Where and when
02 · Where and when

Where and when should I shoot star trails?

Short answer. At a dark site, away from city lights, near the new moon, facing the pole star in the north for circles.

Definition

Star trails need a dark sky. City light limits the exposure, while dark sites allow much longer ones, and a new moon gives the darkest sky.

Key facts

  • Bright city lights limit exposures to short durations, while in dark-sky conditions you can extend them further (Cope, 2006, p. 49).
  • A new moon gives the darkest sky; plan around the moon phase.
  • In India the north celestial pole, near the Pole Star, sits low in the north, at a height above the horizon equal to your latitude.
  • Clear, dry nights after rain often give the clearest skies.
How to

Planning

  1. Check the moon phase and pick a night near the new moon.
  2. Find a site away from towns, with a clear view north.
  3. Check the weather for a clear night and arrive before dark to set up.
Cham tip

Choose the darkest night before you choose the lens.

Cham task
  1. Find a dark place within an hour of your home.
  2. Check the next new moon date.
  3. Visit once in daylight to plan the frame.
Quiz
In photography

Plan a star trail night with the moon phase, site and weather written down.

In cinematography

Film crews scout night locations by day so the camera team knows the ground before dark.

End of 02 · Where and whenNext: 03 · Gear and settings
03 · Gear and settings

What gear and starting settings do I need?

Short answer. A wide, fast lens on a steady tripod, a remote release or interval timer, spare batteries and a red torch; start at f/2.8, ISO 800 and 30 s.

Definition

Star trails need a steady tripod, a wide lens, a way to fire long or repeated exposures without touching the camera, and enough battery for a long night.

Key facts

  • A wide lens with a wide aperture suits star trails, such as a 28 mm f/2.8 (Cope, 2006, p. 49); today 14 mm to 24 mm lenses at f/2.8 are common.
  • Long time exposures drain batteries fast, so carry spares (Cope, 2006, p. 46).
  • Use a remote release or the camera interval timer so you never touch the camera.
  • Use a red torch so your eyes stay used to the dark.
How to

Manual (M)

  1. Fix a 14 mm to 24 mm lens on a tripod; turn stabilisation off.
  2. Set M, f/2.8, ISO 800 and 30 s.
  3. Shoot RAW and set white balance by hand, about 4000 K.
  4. Connect a remote release or set the interval timer.
Cham tip

Charge every battery the day before.

Cham task
  1. Pack a checklist: tripod, wide lens, remote, batteries, red torch, warm clothes.
  2. Practise setting the interval timer at home in the dark.
  3. Time how long one battery lasts in 30 s exposures.
Quiz
In photography

Make a star trail kit list and keep it in your camera bag.

In cinematography

Night shoots in film carry spare batteries for every camera and light, because cold drains them faster.

End of 03 · Gear and settingsNext: 04 · One long exposure
04 · One long exposure

How do I make one long star trail exposure?

Short answer. Make a short test frame at high ISO, then scale it to a long exposure at low ISO by counting stops.

Definition

A single long exposure records star trails in one frame over many minutes. Because you get few chances in a night, make a short test frame first and scale it to the long time by counting stops.

Key facts

  • Davis made a test at 30 s, f/4 and ISO 640, then scaled it to about 90 minutes (5,393 s) at f/22 and ISO 100 by counting the light: 180 times the time, about 6 times less ISO, so about 1/32 of the light through the aperture (Davis, 2008, p. 26).
  • Cope suggests test exposures from ten minutes to an hour with a wide lens (Cope, 2006, p. 49).
  • Use Bulb with a lockable remote for times beyond 30 s.
  • Long exposures add noise and bright specks; long exposure noise reduction removes them but doubles the waiting time.
How to

Bulb (B)

  1. Make a test at f/4, ISO 640 and 30 s and check the sky and foreground.
  2. Work out the long exposure: for each doubling of time, close one stop or lower the ISO one stop.
  3. Set Bulb and lock the remote open for the planned time.
  4. Turn on long exposure noise reduction and wait for it to finish.
Cham tip

Your test frame may be a good picture too. Keep it.

Cham task
  1. Make a 30 s test frame at f/4 and ISO 640.
  2. Work out the settings for a 15 minute exposure at ISO 100.
  3. Shoot it and compare the brightness with the test.
Quiz
In photography

Turn a 30 s test into a 30 minute exposure on paper before you shoot it.

In cinematography

Cinematographers use the same stop counting to keep exposure equal when they change frame rate or shutter angle.

End of 04 · One long exposureNext: 05 · Stacking
05 · Stacking

How do I make star trails by stacking many frames?

Short answer. Shoot many 20 to 30 second frames in a row with an interval timer, then blend them in editing software.

Definition

Stacking makes star trails from many short exposures shot one after another and blended later. Each frame is short and clean, and the trails grow as the frames are added together.

Key facts

  • With digital cameras, most photographers now shoot many 20 to 30 second frames and stack them.
  • Use an interval timer with the shortest gap the camera allows, so the trails have no breaks.
  • Turn long exposure noise reduction off when stacking, because its dark frame leaves gaps between frames.
  • Keep every setting fixed in Manual, including focus and white balance, so the frames match.
How to

Manual (M), interval timer

  1. Set M, f/2.8, ISO 800 and 25 s on a tripod.
  2. Turn long exposure noise reduction off and fix focus in MF.
  3. Set the interval timer to shoot 200 frames with the shortest gap.
  4. Blend the frames later in stacking software or with a Lighten blend in Photoshop.
Cham tip

More frames, longer trails. Same settings in every frame.

Cham task
  1. Shoot 60 frames of 25 s each towards the north.
  2. Stack 10, 30 and 60 frames.
  3. Compare the trail length in each stack.
Quiz
A star trail photograph by Creative Hut Academy. View on Instagram
In photography

Make a 10 second time-lapse video from the same frames you stacked.

In cinematography

Night-sky time-lapses in films and documentaries are made from the same sequences of short exposures.

06 · Focus and foreground

How do I focus and add a foreground?

Short answer. Focus manually on a bright star with magnified live view, and place a tree, temple or hill in the frame for scale.

Definition

Star trails need sharp stars and a foreground that gives scale and place. Focus manually on a bright star, then include a still object such as a tree, a temple or a hill.

Key facts

  • Focus manually with magnified live view on a bright star. The AF-assist lamp reaches only a few metres.
  • A wide lens gives deep focus, so a distant foreground and the stars can both be sharp.
  • A foreground of trees, rocks, temples or hills gives scale and tells the viewer where the picture was made.
  • Take one frame at dusk for the foreground, when it still holds detail, and blend it with the night frames.
How to

Manual focus (MF)

  1. Switch to MF and turn on live view.
  2. Magnify ten times on a bright star and turn the ring until it is smallest.
  3. Tape the focus ring so it does not move.

Foreground at dusk

  1. Before dark, frame the foreground and shoot one frame at f/8 and ISO 100.
  2. Do not move the tripod; wait for dark and start the star frames.
Cham tip

Focus once on a star, then tape the ring.

Cham task
  1. Frame a tree or temple against the northern sky.
  2. Shoot a dusk frame for the foreground, then 30 star frames.
  3. Blend the foreground frame with the stacked stars.
Quiz
In photography

Photograph star trails over a temple gopuram or a coconut grove.

In cinematography

Film night exteriors often blend a dusk plate of the location with a separately shot sky.

End of 06 · Focus and foregroundNext: Questions beginners ask

Questions beginners ask

What settings are used for star trails?

A wide lens at f/2.8, ISO 800 and 20 to 30 second frames stacked, or one long Bulb exposure scaled from a test frame.

How long should a star trail exposure be?

Trails show after a few minutes; 30 minutes to an hour, or 100 to 200 stacked frames of 25 s, gives long arcs.

Where should I point the camera for circular star trails?

At the Pole Star in the north. From India it sits low in the north at a height equal to your latitude.

Can I shoot star trails in a city?

City light limits the exposure and hides faint stars. Go to a dark site for better trails.

References

  • Cope, P. (2006) Night and low-light techniques for digital photography. Buffalo, NY: Amherst Media.
  • Davis, H. (2008) Practical artistry: Light and exposure for digital photographers. Sebastopol, CA: O’Reilly Media.

Read next in the Library

How to cite this guide. Alex, A., & Joseph, A. (2026). Star trail photography: A guide for photographers and cinematographers. Creative Hut Academy. https://creativehut.org/library/star-trail-photography/

© 2026 Creative Hut Academy. Written by Abin Alex and Anu Joseph. Drafted with AI assistance. Last updated 13 November 2026. To copy, republish, translate or adapt any part of it, including the diagrams, you need written permission. Ask through the contact page. The books, standards and data sheets listed above are sources, not copies. Found a mistake? Write to director@creativehut.org.
More guides in the Library →
Learn this hands on

Make this your craft at Creative Hut Academy

Creative Hut Academy in Mattakkara, Kottayam, Keralam teaches photography, cinematography, editing, sound and AI filmmaking in one-year residential diplomas. Students come from across India.

Want to talk? Message us on WhatsApp, or ask Cham, our AI mentor, a study doubt.